is it still on when u take the key out?
Yes
MLB Network Radio was created in 2005.
Def Pen Radio was created in 2005.
Radio Parallèle was created on 2005-11-17.
go to this web page http://www.modifiedlife.com/car-stereo-radio-wiring-diagram-and-wire-colors-2002-jeep-liberty/ there is list on right side for each model year and type of Jeep
Is it an "after-market" radio? It sounds like it was wired to a "hot" terminal that is not controlled by the ignition switch.
how to replace an ignition switch for 2005 chevy equinox
run wire from red power wire on stereo to fuse panel .crimp blade terminal on the wire and slide it into one of the ignition (ign) slots
take it to the dealer and wait for the bill $$$$$$$$$$.
To replace the ignition switch on a 2005 Chrysler Pacifica, start by disconnecting the negative battery cable to ensure safety. Remove the steering column cover by unscrewing the necessary screws, then locate the ignition switch. Disconnect the wiring harness and unscrew the ignition switch from its mounting. Install the new switch in reverse order, ensuring all connections are secure before reconnecting the battery.
To remove the ignition switch from a 2005 Ford F-150, first disconnect the negative battery cable to prevent electrical shorts. Next, remove the steering column covers by unscrewing the screws securing them. After that, locate the ignition switch, which is mounted on the steering column, and disconnect its wiring harness. Finally, remove the screws or bolts holding the ignition switch in place and gently pull it out.
When changing anything on a car, a person needs a diagram. A person can get an ignition switch diagram for this car, by buying the cars maintenance manual.
http://wiki.answers.com/Q/What_part_do_you_need_your_2005_dodge_stratus_was_broken_into_and_ignition_switch_was_broken_out_of_the_steering_wheel_the_part_that_hole_the_switch_in_was_damage"
It seems that there could be a problem with your starter. It happened to me too.
after replacing the stearing colum what would cause it not to start. You may have disconnected the ignition switch.
If the steering wheel is in a certain position, the ignition switch will not release the key. You can turn the steering wheel slightly while removing the key.I think it will work.
cambelt