answersLogoWhite

0

I found that a wire to the ignition switch was broken where you put your key in . this did not let the chip be read . and the security kept flashing.and car would not even start. after repairing the wires it started up perfect. hope this helps

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Natural Sciences

How much electricity does a security light use in a given period of time?

The amount of electricity a security light uses in a given period of time depends on the wattage of the light and how long it is turned on. The formula to calculate the electricity usage is: Power (wattage) x Time (hours) Energy Used (watt-hours).


How do you turn off security light?

To turn off a security light, you can usually flip the switch to the "off" position. If the security light is controlled by a sensor, you may need to adjust the settings to turn it off. Alternatively, you can disconnect the power source from the light to turn it off completely.


What does the security light mean on a Saturn SL2 and why does it turn on intermitantly while driving?

The security light on a Saturn SL2 typically indicates an issue with the vehicle's security system. It may turn on intermittently while driving due to a fault in the system, such as a problem with the key or ignition. It is recommended to have the car checked by a professional mechanic to diagnose and resolve the underlying problem.


Can a starter be replaced with a single pole switch?

I recently tried this. Power surges were ruining a security light over the garage. I thought it was overloading the light sensor which turned the light on at night. So I bypassed the circuit board in the light and put a light switch inside the garage. Most CFL bulbs have the starter built-in, and I thought this was the case on this security light. Not so. The circuit board was also the starter. I had to switch to a regular CFL in lieu of using the extremely bright bulbs (without starters) made for this light.


What electromagnetic radiation are used for n security pen?

Security pens often use ultraviolet (UV) light as a form of electromagnetic radiation to verify the authenticity of documents or currency. When the UV light hits security features printed in UV-reactive ink, it causes them to glow or become visible, helping to distinguish between genuine and counterfeit items.

Related Questions

I have a 92 buick lesabre my security light is flashing and my car wont crank with the key what could be the problem?

take it to dealership


How do you bypass the pass key II system on a 93 Buick lesabre security light flashes no crank no start?

how do i bypass the security code on my 1995 buick lasabre because my key is bad and i dont want to pay 185.00 for a key


My 1989 buick lesabre want start what's wrong with my car?

give symptoms: any noises (if so describe), is security light on dash on, etc.


2000 buick lesabre le airbag and security light check engine light stay on and radio will not function and air cond will not work?

Have vehicle scanned to see if any codes are present


Trunk tail light buick lesabre 2001 socket size?

The socket size for the trunk tail light on a 2001 Buick LeSabre is 7mm. Bulbs can be purchased at most local automotive repair stores.


Where is the fusible link for 94 buick lesabre?

94 Buick Lesabre replaced battery and alternator and the alternator is not charging the battery. Battery light is on and off. Is this fusable link. If so where is it located


How do you change a brake light on 1997 Buick LeSabre?

I think the light assembly screws out from the inside of the trunk.


How to disconnect brake warning light and sound 1998 buick lesabre?

Cut the wire


Security light in 1999 Buick regal?

Why is my security light on and will not let my key come out of the ignition. 1999 buick regal


How to change a brake light on a 91 buick lesabre?

Should have an access panel inside trunk


How do you crank a 93 buick lesabre when the security light come on?

When the security light is on the starter will not engage. You must wait a few minutes for the light to turn off before attempting to start car again, this is to help prevent theft. Ensure the contacts on the black chip on the key are clean and that the chip is centered in the key.


What can you do about your check engine light being on on a 1994 Buick Lesabre?

Get a code read out from your engine computer and it will tell you what is wrong.