A 4-12 pitch with a 30lb snow load will hold approximately 6 feet of wet snow. If you went to a 40lb-snow load and kept the roof pitch at 4-12 your roof would be able to hold 8 feet of wet snow.
We don't get that much dry powder in New England...:)
Instument: a balance, a scale, of any size Units: depending on size either a gram or a kilogram if you are using scientific terms (SI units).........a pound in American Standard Units.
To determine the cost per square foot of the driveway to handle an 80,000-pound load, you would need to consider the type of material and thickness required for the driveway, as well as any necessary reinforcement. It is recommended to consult with a contractor who specializes in driveway construction to get an accurate estimate based on your specific needs and the local building codes.
The four major load control functions are load forecasting, load scheduling, load shedding, and load balancing. Load forecasting involves predicting future energy demands to ensure adequate supply. Load scheduling optimizes the timing and distribution of power generation and consumption. Load shedding is the deliberate reduction of load to prevent system overloads, while load balancing ensures that supply matches demand in real-time for grid stability.
The four major load control functions found on a lift are load sensing, load holding, load monitoring, and overload protection. Load sensing ensures the lift adjusts its operation based on the weight being carried, load holding prevents the lift from moving when under load, load monitoring provides feedback on the load status, and overload protection stops the lift from operating if the load exceeds its capacity.
The four major load control functions are load forecasting, load scheduling, load dispatching, and load balancing. Load forecasting involves predicting future electricity demand based on historical data and trends. Load scheduling allocates resources to meet the forecasted demand, while load dispatching ensures the optimal generation units are activated to supply the required load. Finally, load balancing maintains the equilibrium between supply and demand in real-time to ensure system stability.
The number of 9mm bullets you can reload with 1 pound of smokeless gunpowder depends on the specific load recipe and powder type. Typically, a standard load for 9mm could use around 4-5 grains of powder per cartridge. Since there are 7,000 grains in a pound, you could reload approximately 1,400 to 1,750 rounds of 9mm ammunition with 1 pound of powder. Always refer to specific reloading manuals for precise measurements and safety guidelines.
Do not attempt to do load with smokeless powder.
load data
Depends on the load and the powder used.
With ammunition, the term GRAIN is a measure of weight- there are 7000 grains to a US pound. It does not refer to the number of individual flakes of powder (grains). Load data will vary depending on the weight of shot to be fired, and how hard you want that to shoot- and it also varies depending on which of several powders you use. For example, a 1 oz shot load might use from 20-25 grains of powder X, 22-27 grains of powder Y- and a 1 1/8th oz shot load might use 18-14 grains of X, etc.
black powder, bullet patch, projectile.
I believe 3 grains of black powder for a start
bullseye powder 2.8 to 3.0 grains. about 148 grain bullet, plus or minus......
The only way to be certain is to remove the bullet with a bullet puller, empty out the powder, and weigh it.
It depends on the load.
1500
For top load washing machines, you can use any regular laundry detergent powder that is suitable for your laundry needs. Make sure to follow the manufacturer's instructions on the detergent packaging, and use the appropriate amount of detergent based on the size and soil level of your laundry load.