answersLogoWhite

0

The four standard colors used for communication in cable wires are red, black, yellow, and white. These colors correspond to specific signal or function assignments in the cable, such as power, ground, audio, and video signals. Adhering to these color standards helps ensure consistency and clarity in cable wiring setups.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

Can copper wires carry digital information?

Yes, this is done all the time. Category 5, category 5e, and category 6 are the most common copper cables used at this time. They are basically advanced versions of the original phone cable. Coax cable is another type of copper cable used to carry digital information. It is the cable the satellite dish and cable companies use and the most common type is RG-6. This cable is capable of faster data transfer speeds than the phone type cables.


What are the different types of household wires called?

The most common types of household wires are: Non-metallic sheathed cable (NM) Armored cable (AC) Flexible metal conduit (FMC) Electrical metallic tubing (EMT) Underground feeder (UF) cable


How to terminate a cat 5 cable?

Generally speaking, UTP of Cat5, Cat5e, or Cat 6 is physically terminated with either an RJ-45 plug or RJ-45 jack. The wiring pattern depends on whether you are using 568A or 568B as your cable standard.


How do you connect red white black and green form USB to a two wire cable having red lack?

You can connect the red wire from the USB cable to the red wire of the two-wire cable. The black wire from the USB cable can be connected to the black wire of the two-wire cable. As for the white and green wires from the USB cable, since the two-wire cable only has a red and black wire, you can leave the white and green wires unconnected as they are not needed in this case. Just make sure to insulate the unused wires properly to avoid any short circuits.


Does rib equal white on a three wire cable?

Usually you only see the rib on two wire cords. Yes this is the wire that gets connected to the silver screw on the plug end. On a three wire cord the inner wires are usually colour code identified. Black to the brass coloured screw, white to the silver coloured screw and green to the green coloured screw which is the ground connection.

Related Questions

How many wires does the standard ide cable have?

40


How many wires are there in a USB cable?

a usb cable has four wires, two for power and two for communication.


What is a set of wires or communication paths that allows various devices to transfer in information called?

a cable?


What are the wires that come with the PS3 Slim?

There is a power cable, a controller set up and charging cable USB, and an A/V cable for standard 480i TV connection


What is the standard colour codes for wires in direct current?

Usually red is for positive and black is for negative.


How many wires are required for cat5 communication from the router to computers?

A Cat5 cable contains 4 pairs of 2 wires twisted together, making a total of 8 individual wires, however only 2 wire pairs (4 wires) are actually used for communication.


How many wires in a floppy cable?

AnswerA standard floppy drive cable in a computer has 34 pins.


What colour is the speed sensor wire in a Nissan Micra k12?

The speed sensor, on your Nissan, has a black cable. The speed sensor does not actually have any wires. The cable goes to the speedometer.


How many wires are in coaxial cable?

how many wires does a coaxial cable have


How to wire an Ethernet cable for optimal connectivity?

To wire an Ethernet cable for optimal connectivity, follow the T568B wiring standard. Strip the cable jacket, arrange the wires in the correct order, and insert them into the RJ45 connector. Use a crimping tool to secure the wires in place. Test the cable to ensure it is working properly.


How to crimp an ethernet cable properly?

To crimp an Ethernet cable properly, follow these steps: Strip about 1.5 inches of the outer insulation from the cable. Untwist and arrange the colored wires in the correct order according to the Ethernet cable standard (T568A or T568B). Trim the wires to the same length and insert them into the RJ45 connector. Use a crimping tool to secure the wires in the connector. Test the cable to ensure it is working correctly.


What are the two crimping standard of cat6 cable?

The two crimping standards for Cat6 cable are T568A and T568B. Both standards specify the pinouts for the eight wires within the cable, but they differ in the order of the color-coded wires. T568A is often preferred for residential installations, while T568B is commonly used in commercial settings. It's important to use the same standard on both ends of the cable to ensure proper connectivity.