answersLogoWhite

0

You can connect the red wire from the USB cable to the red wire of the two-wire cable. The black wire from the USB cable can be connected to the black wire of the two-wire cable. As for the white and green wires from the USB cable, since the two-wire cable only has a red and black wire, you can leave the white and green wires unconnected as they are not needed in this case. Just make sure to insulate the unused wires properly to avoid any short circuits.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

How do you connect a purple and black wire to a red black green white usb cable wire?

To connect a purple and black wire to a USB cable that has red, black, green, and white wires, first identify the purpose of the purple and black wires, as they might correspond to specific functions. Typically, the red wire is for power (+5V), the black wire is for ground, green is for data positive (D+), and white is for data negative (D-). Carefully strip the ends of the wires and twist or solder them together based on their functions, ensuring proper insulation afterward to prevent short circuits. Always use caution and refer to the specific wiring diagram for your devices to avoid damage.


How do you wire a 3 prong outlet with newer 4 wire cable?

To wire a 3-prong outlet with newer 4-wire cable, you will connect the black and red wires to the brass screws for the hot connections, the white wire to the silver screw for the neutral connection, and the green or bare wire to the green screw for the ground connection. Be sure to consult local electrical codes to ensure proper installation.


My new table saw has a cord with three wires total red black and green can you run two wire BX from the breaker panel and if so do you just consider the black and white as hot and no neutral?

Sounds as though your saw is a 220 volt saw. If so then yes if you run a 2 conductor BX cable you will employ the black and white conductors in the cable as the two "hot" conductors. So just wire black to black, and red to white. However, you should be running a 3 conductor cable to provide a ground to your saw.


How do you connect a 240 v cooktop with 4 wires to a service panel with 3 wires?

The new cooktop has a 4 wire connection. Red & Black are hot. White is neutral, and green is ground. You existing panel is wired with 3 wires. Black & Red are hot and green is ground. There is no neutral wire. Connect the black to black, red to red, and then connect the white and ground together at the plug.


What is the opposite of green thumb?

The opposite of having a "green thumb" is having a "black thumb," which refers to a person who struggles to keep plants alive and may have difficulty with gardening or plant care.

Related Questions

Is a red white yellow audio cable the same as green black yellow?

The GREEN and BLACK is a non stereo hook-up cable. Use the Green for VIDEO and the Black for the LEFT channel of AUDIO.


How do you connect a purple and black wire to a red black green white usb cable wire?

To connect a purple and black wire to a USB cable that has red, black, green, and white wires, first identify the purpose of the purple and black wires, as they might correspond to specific functions. Typically, the red wire is for power (+5V), the black wire is for ground, green is for data positive (D+), and white is for data negative (D-). Carefully strip the ends of the wires and twist or solder them together based on their functions, ensuring proper insulation afterward to prevent short circuits. Always use caution and refer to the specific wiring diagram for your devices to avoid damage.


How do you connect a tach on a 1998 Chevy Cavalier?

Connect the green wire to the brown striped black wire.


What is the proper way to connect a green, black, and white wire in an electrical circuit?

To connect a green, black, and white wire in an electrical circuit, you should connect the green wire to the ground terminal, the black wire to the hot terminal, and the white wire to the neutral terminal. Make sure to follow proper safety precautions and consult an electrician if needed.


Your wall cooker socket wires are black green and red which is which?

Red - active, (commonly known as your live cable) Black - Neutral Green - Earth


How do you wire a 3 prong outlet with newer 4 wire cable?

To wire a 3-prong outlet with newer 4-wire cable, you will connect the black and red wires to the brass screws for the hot connections, the white wire to the silver screw for the neutral connection, and the green or bare wire to the green screw for the ground connection. Be sure to consult local electrical codes to ensure proper installation.


My new table saw has a cord with three wires total red black and green can you run two wire BX from the breaker panel and if so do you just consider the black and white as hot and no neutral?

Sounds as though your saw is a 220 volt saw. If so then yes if you run a 2 conductor BX cable you will employ the black and white conductors in the cable as the two "hot" conductors. So just wire black to black, and red to white. However, you should be running a 3 conductor cable to provide a ground to your saw.


What is the colour of 240 volt power cable?

Brown black and ground (yellow=green). The brown and black can alco be black and blue and brown and black


How can you connect Altec Lansing ADA995 speakers to your laptop?

lime green, black and yellow


Can a 220-4 wire cord be reduced to 3 wire?

When flexible cords are talked about the ground wire is in the conductor count. A four wire cord will have black, red, white, and green coloured wires in the flexible cable set. A three wire cord will have a black, white and green coloured wires in the cable set. To use a four wire cord to carry 220 volts just use the black, red and green wires. Connect to the cord ends. Black and red to the outside blade terminal screws and the green wire to the green ground screw. To use a three wire cord to carry 220 volts just use all of the wires. Black and white to the outside blade terminal screws and the green wire to the green ground screw.


What is the proper way to connect white, black, and green wires in an electrical circuit?

To properly connect white, black, and green wires in an electrical circuit, you should match the white wire to the neutral terminal, the black wire to the hot terminal, and the green wire to the ground terminal. This ensures the safe and effective flow of electricity in the circuit.


What is the cable color coding in Toyota hilux?

www.installdr.com can help a little but it leaves a few wires out like what to connect to the pink with blue stripe wire or the light green wire the brown wire and the gray with black stripedont know what these do.