answersLogoWhite

0

In Florida or North Dakota? It matters...

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Natural Sciences

What size electric boiler will it take to heat 1000 sq feet?

The size of the electric boiler needed to heat a 1,000 square foot space typically depends on factors like insulation, climate, and desired temperature. A general rule of thumb is to allocate about 30 to 40 BTUs (British Thermal Units) per square foot. Therefore, you would need an electric boiler with a capacity of approximately 30,000 to 40,000 BTUs to effectively heat the area. It's advisable to consult a heating professional for a more accurate assessment based on specific conditions.


What size orifice drill is needed for a natural gas burner using 5000 btus?

To determine the appropriate size orifice drill for a natural gas burner using 5,000 BTUs, you typically need to consider the gas pressure and the burner design. A common rule of thumb is that for natural gas, approximately 1,000 BTUs requires a drill size of about 0.025 inches. Therefore, for a 5,000 BTU burner, an orifice size of approximately 0.065 inches might be appropriate, but it's essential to consult manufacturer specifications or a gas sizing chart for precise requirements.


How much gas does a fire pit burn?

The amount of gas consumed by a fire pit depends on its size, heat output, and duration of use. On average, a typical propane fire pit can burn between 20,000 to 80,000 BTUs per hour. It's important to refer to the manufacturer's instructions for specific information on gas consumption.


How many watts does a puron air conditioner have?

Puron is a trade name for an environmentally friendly refrigerant (freon). The amount of power an air conditioner would consume is mostly dependant on the size (capacity) and the conditions under which it is operating. A rough estimate for an air conditioner is 1.4 horse power per ton (12000 BTUs), and one horse power is 740 watts.


When a truck pulls a trailer the trailer and truck accelerate forward even though the action and reaction forces are the same size but are in opposite directions. Why don't these forces balance each o?

The action and reaction on the tow bar are forces which are internal to the system comprising truck+trailer. They therefore do not affect the motion of that system. The motion of the truck+trailer system is affected by forces acting on the system, not within the system,The fact that the action and reaction between the truck and trailer are balance explains why the trailer does not slam into the truck.

Related Questions

How hot is 5000 btus?

BTUs, or British Thermal Units, measure energy rather than temperature directly. A rating of 5,000 BTUs typically indicates the heat output of an appliance, like an air conditioner or heater, rather than a specific temperature. For context, 5,000 BTUs can cool or heat a small room, but the actual temperature achieved will depend on factors like room size, insulation, and external conditions.


How many BTUs is needed to heat to 70 degrees?

The number of BTUs needed to heat a space to 70 degrees will depend on factors such as the size of the space, insulation levels, outdoor temperature, and efficiency of the heating system. A general estimate is around 25-30 BTUs per square foot. It is recommended to consult a heating professional for a more accurate calculation.


What sort of research should I do when in the market for an industrial heater?

Know the number of BTUs recomended for the size area you need to heat. Know the safety specifications.


How many btus to heat a hot tub?

The number of BTUs required to heat a hot tub depends on its size, the desired temperature increase, and the ambient temperature. On average, it takes about 4-6 BTUs to raise the temperature of one gallon of water by one degree Fahrenheit. For example, heating a 400-gallon hot tub from 50°F to 100°F would require approximately 80,000 to 120,000 BTUs, depending on the specific conditions. Always consider factors like heat loss due to evaporation and wind when estimating heating needs.


Enclosed Trailers?

form_title= Enclosed Trailers form_header= Buy an enclosed trailer. What size trailer do you need?*= _ [50] Can you pick up the trailer?*= () Yes () No Do you want the trailer to be new or used?*= () New () Used


Btu of heat equal 3 ton cooling unit?

A 3-ton cooling unit can remove heat at a rate of 36,000 BTUs per hour, as one ton of cooling is equivalent to 12,000 BTUs. Therefore, a 3-ton unit, which is typically used in air conditioning systems, is capable of cooling a space by removing 36,000 BTUs of heat every hour. This measurement helps in determining the appropriate size of air conditioning units for specific spaces based on their cooling requirements.


What is the standard size of a trailer tire?

The standard size of a trailer tire depends on the size of the trailer. The standard size for most of the trailers and the main trailers are 28 inches in diameter.


What size heat pump for a 1 story 1150 sf house?

To determine the appropriate size heat pump for a 1,150 square foot house, you generally need about 20-30 BTUs per square foot, depending on factors like climate, insulation, and specific heating/cooling needs. This means you would likely require a heat pump with a capacity ranging from approximately 23,000 to 34,500 BTUs. It's best to consult with an HVAC professional for a precise calculation based on your home's unique characteristics.


What information can I find on a heat pump sizing chart?

A heat pump sizing chart provides information on the appropriate size of a heat pump needed for a specific area or space. It typically includes details such as the square footage of the area, climate zone, insulation levels, and recommended heat pump capacity in BTUs or tons. This helps in selecting the right size heat pump for efficient heating and cooling.


What size electric boiler will it take to heat 1000 sq feet?

The size of the electric boiler needed to heat a 1,000 square foot space typically depends on factors like insulation, climate, and desired temperature. A general rule of thumb is to allocate about 30 to 40 BTUs (British Thermal Units) per square foot. Therefore, you would need an electric boiler with a capacity of approximately 30,000 to 40,000 BTUs to effectively heat the area. It's advisable to consult a heating professional for a more accurate assessment based on specific conditions.


What size unit is needed to cool a 700 sq ft home?

1800 btus


What size pick up to pull travel trailer?

It would depend on the size/weight of the travel trailer. More info needed.