The number of BTUs needed to heat a space to 70 degrees will depend on factors such as the size of the space, insulation levels, outdoor temperature, and efficiency of the heating system. A general estimate is around 25-30 BTUs per square foot. It is recommended to consult a heating professional for a more accurate calculation.
The number of BTUs needed to heat a room can vary based on factors like insulation, ceiling height, climate, etc. As a rough estimate, you can use the formula: 20 BTUs per square foot for a room with standard ceiling height. Therefore, for a 60 square foot room, you would need around 1,200 BTUs to heat it effectively.
To raise the temperature of 1 pound of water by 1 degree Fahrenheit, it requires 1 BTU (British Thermal Unit). Therefore, to heat water by 10 degrees, it would require 10 BTUs per pound of water. This value may vary slightly depending on the specific heat capacity of the water.
One pound of steam at 212 degrees Fahrenheit contains 1150 BTUs of energy.
To change 10 pounds of ice at 20 degrees Fahrenheit to steam at 220 degrees Fahrenheit, you need to supply enough energy to first melt the ice, then heat the water to the boiling point, and finally convert it to steam. This process requires approximately 180 BTUs per pound of ice to melt it, 180 BTUs per pound of water to heat it to the boiling point, and then 970 BTUs per pound of water to convert it to steam. So, for 10 pounds of ice, the total BTUs required would be around 18,300 BTUs.
The amount of BTUs needed to heat a room depends on various factors such as insulation, ceiling height, climate, and desired temperature. As a rough estimate, for a moderately insulated room with an 8-foot ceiling in a cold climate, you would need around 20-25 BTUs per square foot. So for a 600 sqft room, you would need approximately 12,000-15,000 BTUs to heat it effectively.
100 BTU if it's Fahrenheit
btus needed to heat & cool 625sf room
6,520 Btus
There are no units for the temperature. The temperature change could be 230 Celsius degrees or 170 Fahrenheit degrees (94 Celsius degrees). In fact they could be in less commonly used units: eg Reaumur.
The number of BTUs needed to heat a room can vary based on factors like insulation, ceiling height, climate, etc. As a rough estimate, you can use the formula: 20 BTUs per square foot for a room with standard ceiling height. Therefore, for a 60 square foot room, you would need around 1,200 BTUs to heat it effectively.
4800 BTUs will 150 square feet.
To raise the temperature of 1 pound of water by 1 degree Fahrenheit, it requires 1 BTU (British Thermal Unit). Therefore, to heat water by 10 degrees, it would require 10 BTUs per pound of water. This value may vary slightly depending on the specific heat capacity of the water.
One pound of steam at 212 degrees Fahrenheit contains 1150 BTUs of energy.
To change 10 pounds of ice at 20 degrees Fahrenheit to steam at 220 degrees Fahrenheit, you need to supply enough energy to first melt the ice, then heat the water to the boiling point, and finally convert it to steam. This process requires approximately 180 BTUs per pound of ice to melt it, 180 BTUs per pound of water to heat it to the boiling point, and then 970 BTUs per pound of water to convert it to steam. So, for 10 pounds of ice, the total BTUs required would be around 18,300 BTUs.
how many square feet will 26,000.00 heat
to calulate your btu needs,you can use this link: http://hearth.com/calc/btucalc.html
The amount of BTUs needed to heat a room depends on various factors such as insulation, ceiling height, climate, and desired temperature. As a rough estimate, for a moderately insulated room with an 8-foot ceiling in a cold climate, you would need around 20-25 BTUs per square foot. So for a 600 sqft room, you would need approximately 12,000-15,000 BTUs to heat it effectively.