To raise the temperature of 1 pound of water by 1 degree Fahrenheit, it requires 1 BTU (British Thermal Unit). Therefore, to heat water by 10 degrees, it would require 10 BTUs per pound of water. This value may vary slightly depending on the specific heat capacity of the water.
To change 10 pounds of ice at 20 degrees Fahrenheit to steam at 220 degrees Fahrenheit, you need to supply enough energy to first melt the ice, then heat the water to the boiling point, and finally convert it to steam. This process requires approximately 180 BTUs per pound of ice to melt it, 180 BTUs per pound of water to heat it to the boiling point, and then 970 BTUs per pound of water to convert it to steam. So, for 10 pounds of ice, the total BTUs required would be around 18,300 BTUs.
To raise 1 pound of ice from 32°F to water at 32°F it requires 144 BTUs. Since you have 50 pounds of ice, you would need 50 * 144 BTUs to raise the ice to water at 32°F. To further raise the water from 32°F to 160°F, you would need an additional amount of BTUs based on the specific heat capacity of water.
To calculate the BTUs required to raise the temperature of 15 pounds of water, you can use the formula: BTUs = Weight of water in pounds × Temperature change in degrees Fahrenheit × 1 BTU So, the calculation would be: BTUs = 15 lbs × (130°F - 100°F) × 1 BTU = 15 lbs × 30°F = 450 BTUs.
The number of BTUs needed to heat a space to 70 degrees will depend on factors such as the size of the space, insulation levels, outdoor temperature, and efficiency of the heating system. A general estimate is around 25-30 BTUs per square foot. It is recommended to consult a heating professional for a more accurate calculation.
It takes 970.4 BTUs to convert 1 lb of water at 212°F to 1 lb of steam at 212°F. This process is known as the latent heat of vaporization.
100 BTU if it's Fahrenheit
To change 10 pounds of ice at 20 degrees Fahrenheit to steam at 220 degrees Fahrenheit, you need to supply enough energy to first melt the ice, then heat the water to the boiling point, and finally convert it to steam. This process requires approximately 180 BTUs per pound of ice to melt it, 180 BTUs per pound of water to heat it to the boiling point, and then 970 BTUs per pound of water to convert it to steam. So, for 10 pounds of ice, the total BTUs required would be around 18,300 BTUs.
That will completely depend on how much water there is.
To raise 1 pound of ice from 32°F to water at 32°F it requires 144 BTUs. Since you have 50 pounds of ice, you would need 50 * 144 BTUs to raise the ice to water at 32°F. To further raise the water from 32°F to 160°F, you would need an additional amount of BTUs based on the specific heat capacity of water.
There are no units for the temperature. The temperature change could be 230 Celsius degrees or 170 Fahrenheit degrees (94 Celsius degrees). In fact they could be in less commonly used units: eg Reaumur.
2250
25
To calculate the BTUs required to raise the temperature of 15 pounds of water, you can use the formula: BTUs = Weight of water in pounds × Temperature change in degrees Fahrenheit × 1 BTU So, the calculation would be: BTUs = 15 lbs × (130°F - 100°F) × 1 BTU = 15 lbs × 30°F = 450 BTUs.
6,520 Btus
The number of BTUs needed to heat a space to 70 degrees will depend on factors such as the size of the space, insulation levels, outdoor temperature, and efficiency of the heating system. A general estimate is around 25-30 BTUs per square foot. It is recommended to consult a heating professional for a more accurate calculation.
The specific heat of water is 1 BTU per pound per degree Fahrenheit. There are 8.3378 lbs/gallon at 60 degrees, which equals 3251.742 pounds of water. The number of BTUs to raise it 188 degrees is then 611,327.496 BTUs.
212 - 80 = 132 degrees temperature increase x 1 pound water = 132 BTU