0
The maximum length of the straw can be calculated using the concept of hydrostatic pressure. By reducing the atmospheric pressure by 85 percent, the maximum height difference the lemonade can be lifted is about 11.72 meters, corresponding to the pressure difference. Therefore, the maximum length of the straw would be approximately 11.72 meters.
What else can I help you with?
What is the vapour pressure of water at 100 degree Celsius?
At 100 degrees Celsius, the vapor pressure of water is equal to atmospheric pressure, which is approximately 101.3 kPa (or 1 atmosphere). This is the temperature at which water boils and transitions from liquid to gas. Therefore, at this temperature, water will readily evaporate, and its vapor pressure will be at its maximum under standard atmospheric conditions.
What is the most dense temperature of air?
The most dense temperature of air occurs at lower temperatures, specifically around -60 degrees Celsius (-76 degrees Fahrenheit), at which point air density reaches its maximum. At this temperature, the molecules are closely packed together, resulting in higher density compared to warmer temperatures. However, real atmospheric conditions also play a role, with humidity and pressure influencing air density in various environments.
What is the factor on the density theoritical?
It is theoretical because cell density cannot be forced to reach maximum density.
At what temperature does maximum density occur?
The maximum density of water occurs at 4 degrees Celsius (39.2 degrees Fahrenheit). At this temperature, water molecules are arranged in a way that allows for the highest density before expanding and becoming less dense as it freezes into ice.
What can be the minimum and maximum temperatures to which the water can be colled or heated?
The minimum temperature is 0°C (freezing point) and the maximum temperature is 100°C (boiling point) at standard atmospheric pressure. However, water can be cooled below 0°C and heated above 100°C under certain conditions such as high pressure or with additives.
To suck lemonade of density 1000 kgm3 up a straw to a maximum height of 3.2 cm what minimum gauge pressure in atmospheres must you produce in your lungs?
P= density x gravity x height and the answer is negative because air is reduced in the straw
What is the maximum temperature that boiling water can reach?
The maximum temperature that boiling water can reach is 212 degrees Fahrenheit (100 degrees Celsius) at standard atmospheric pressure.
What is the maximum height that water you can suck water up a pipe?
Depends on atmospheric pressure. At 1 ATM this is 10.3m (33 feet)
Where is atmospheric pressure maximum and why?
A saxophone is playing a steady note of frequency 210 Hz. The temperature in the room is 25 C. Suppose that, at some instant, the varying pressure at your eardrum is at a maximum. How far away (in meters) is the next pressure maximum? If anyone can help me with this, I would appreciate? The speed of sound at 25 C = 343m/s wavelength = speed of sound / frequency wavelength = 343m/s / 210/s = 1.6m Therefore, the distance of the next pressure maximum is 1.6m away from your ear drum.
What is the maximum height to which water could be drunk through a straw?
The max height for mercury to be raised in normal atmospheric pressure is 76 cm. As the relative density of mercury is 13.6 then the max height in case of water is 13.6 times 76 cm. This would be equal to 1033.6 cm. Some 10.336 m.
Why cant water boil over 100 degrees?
Water boils at 100 degrees Celsius at standard atmospheric pressure because that is the temperature at which its vapor pressure equals the atmospheric pressure. If the temperature is increased beyond 100 degrees Celsius, the vapor pressure exceeds the atmospheric pressure, causing the water to evaporate rapidly but not necessarily boil.
What is the difference between a tank and vessel?
A tank is designed to hold the maximum hydrostatic pressure at the base -- based on the depth of the tank, the density of the material it holds, and maximum atmospheric pressure (with added margin for safety). A tank wall may be constructed with 'thicker' material at the base and 'thinner' material at the top, to save cost. The top of the tank need only support its own weight (plus safety margin). A pressure vessel must withstand the rated pressure at all points around the surface of the vessel.
How high can you suck water up a straw if The pressure in the lungs can be reduced to about 5 kPa below atmospheric pressure?
The pressure 5kPA is about 0.725psi or 104.4lbs/sqft. (we're using feet for the cross section of the straw so that we can use it easily for the height) We know that water has a density of 62.4lbs/ft^2. Therefore, we divide the weight of the water that we can suck up the straw at 5kPa by the density of water. We get the volume of water that we can move. (104.4lbs) / (62.4lbs/ft^3) = 1.67ft^3 Since our column is a 1ft x 1ft column, water will be able to be lifted to 1.67ft.
Why Does atmospheric pressure decreased as you climb a mountain?
The atmosphere is full of layers and when you are at ground level, you have a maximum amount of air above you, but when you climb the mountain, the amount of air decreases and thus the pressure Hope that was helpful!
What is the most dense temperature of air?
The most dense temperature of air occurs at lower temperatures, specifically around -60 degrees Celsius (-76 degrees Fahrenheit), at which point air density reaches its maximum. At this temperature, the molecules are closely packed together, resulting in higher density compared to warmer temperatures. However, real atmospheric conditions also play a role, with humidity and pressure influencing air density in various environments.
What factors can effect the density of water?
Factors that can affect the density of water include temperature, pressure, and the presence of impurities. As temperature decreases, water becomes denser until it reaches its maximum density at 4°C. Increasing pressure will also increase the density of water. Impurities, such as salt, can also alter the density of water by changing its composition.
Maximum bulk density can be occur?
bulk density depend on that material from which soil formed. so maximum bulk density depend on particle density of that mineral. Therefore,we can only tapped the soil upto perticle density. so maximum bulk density may be occur at equal to paricle density.
