0
Admiral washer dose not wash it just fill up with water and clicks then it spin and dranes out all the water it doesn't wash?
It sounds like there may be an issue with the washer's agitator or wash cycle mechanism. Check if the agitator is moving properly during the wash cycle. Also, inspect the belt or drive motor for any signs of wear or damage that may be affecting the washing cycle. If these checks don't resolve the issue, consider contacting a professional technician for further diagnosis and repair.
What else can I help you with?
What happens to the hole of the washer when heated?
When a washer is heated, the hole will expand in size due to thermal expansion. This means that the diameter of the hole will increase as the washer absorbs heat. Cooling the washer will cause the hole to contract back to its original size.
Where can one purchase a Maytag Neptune washer?
You can purchase a Maytag Neptune washer at online shops like Amazon. Furthermore you can buy a Maytage Neptune washer at the official website of Maytage.
What is cubic foot capacity of Amana washer model NFW7500VW?
That's a front-load washer with a capacity of 4.1 cubic feet.
What year was Maytag washer model A612 made?
The Maytag washer model A612 was manufactured in the late 1970s to early 1980s. It was part of Maytag's top-loading washer lineup during that time.
How many amps does a regular clothes washer use?
A regular clothes washer typically uses around 7-15 amps during operation. It may vary slightly depending on the specific model and brand of the washer.
Does the Admiral washing machine come in white?
Yes, you can find you Admiral washer in the color white. It has a rating of 4 stars! You can purchase this amazing washer for only $349! It's never been better!
Why doesnt window washer work in 1992 Town Car Wipers work ok but washer doesn't work?
need windshield washer motor
97 f250 Window washer only clicks when you try to use?
window washer pump is broken pump is in bottom of fluid bottle under hood pump is cheap to buy and easy to replace
How do you replace rear crv windshield washer nozzle?
To replace the rear windshield washer nozzle on a Honda CR-V, first, locate the nozzle at the rear of the vehicle, typically mounted on the tailgate. Use a flat-head screwdriver to gently pry off the old nozzle from its housing. Connect the new nozzle to the existing washer hose and push it firmly into place until it clicks. Finally, test the new nozzle by activating the rear washer to ensure it functions properly.
2002 Isuzu rodeo your wipers in the rear doesnt work and the front wiper doesnt spray the washer?
The fluid not spraying could be a clogged line or disconnected line or bad windshield washer motor. The rear wiper not working could be a bad wiper motor in the rear or unhooked linkage or fuse or relay. Check the fuses etc first.
The blower motor is new-the switch still doesnt work-1991 dodge shadow?
check the blower motor resistor located on fire wall behind washer fluid tank
What's the difference between a front load washer and a normal washer?
The difference between a front load washer and regular washer is that a front load washer has a door in front were clothes are loaded and that is also where washer settings are located. The regular washer is usually a top load where clothes are loaded on top of the washer.
What is the correct order of installation for a washer and lock washer?
The correct order of installation for a washer and lock washer is to first place the washer on the bolt or screw, followed by the lock washer. The lock washer helps prevent the nut from loosening due to vibrations or other movements.
What is the recommended order of installation for a lock washer and a flat washer?
The recommended order of installation for a lock washer and a flat washer is to place the flat washer first, followed by the lock washer on top of it. This helps to ensure proper locking and securing of the fastener.
Where do you put the windshield washer?
in the washer bottle
Does the washer have water in it?
Yes, the washer has water in it.
Washer Pump how to find it?
Most washer pumps are attached to the bottom of the washer fluid reservoir.
