Could be about 13 amps at 240 v.
Many things. From sticking up photos and papers on the fridge, to keeping the directions for washing clothes on the washer for your family to remember.
1.3 amps
The voltage would be the same even if you installed three washing machines. The amp draw is what will change. An automatic washer uses about 120 volts at about 700 watts, so your washer would draw a little less than six amps. It is recommended that it have a dedicated 20 amp circuit. If you install a dryer then the voltage requirement would be about 240.Rate
3000 milliamps is equal to 3 amps. To convert milliamps to amps, you divide by 1000.
5.8 amps
a regular toaster uses about 12.5 amps
How many lbs of cloathing equal 3.2 cubic feet
Depends, how many clothes you are washing and how. By hand? by ringer washer? by old elictirc, or HE washer.
Because the washer is many years old, and the 'brushes' on its electric motor need to be replaced.
About 20 pounds.
Absolutely. You can use an HE detergent in a non HE washer without issue. For more information about HE laundry check out LaundryHE.com, which is powered by Wisk. -The LaundryHE.com Team
There are grills of many different amps. Your regular stove top ones are about 15 amps. Individual grill machines for countertop use must have amps usage printed on the label.
The Dish Washer uses 40 litres of water per load a day!!!
To prevent your washer from moving during the spin cycle, make sure it is level on the floor. You can also adjust the feet of the washer to ensure stability. Additionally, avoid overloading the washer with too many clothes, as this can cause imbalance and movement during the spin cycle.
Many things. From sticking up photos and papers on the fridge, to keeping the directions for washing clothes on the washer for your family to remember.
The LG washer dryer combo has suffered many complaints about its quality. Customers report that the combo machine does not have a way to remove lint, clogged pipes, and causes wrinkled clothes.
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.