0
What else can I help you with?
What is the voltage at a 100 watt metal halide light bulb?
It depends......perhaps 7400 to 8500 initial lumens degrading to 5400 lumens.
Can you run a 50 watt halide bulb on a 100 watt halide ballast?
No, it is not recommended to run a 50 watt halide bulb on a 100 watt halide ballast. The ballast should match the wattage of the bulb to ensure proper operation and to avoid potential damage to the bulb and ballast. It is best to use a ballast that is rated for the wattage of the bulb being used.
Can you use a 65 watt fluorescent bulb in a metal halide light fixture?
No, the ballast's output is not matched to operate a fluorescent bulb.
How many fluorescent tubes equal 1000 watt metal halide light?
It would depend on the wattage of the fluorescent tubes. As a rough estimate, you would need about 6-8 standard 40-watt fluorescent tubes to approximate the light output of a 1000-watt metal halide bulb.
Can you use a 70 watt high pressure sodium bulb in a 100 watt ballast?
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
Can you replace a 150 watt metal halide lamp with a 175 watt?
The light bulb needs to match the ballast in the fixture.
What is the voltage at a 100 watt metal halide light bulb?
It depends......perhaps 7400 to 8500 initial lumens degrading to 5400 lumens.
Can you run a 50 watt halide bulb on a 100 watt halide ballast?
No, it is not recommended to run a 50 watt halide bulb on a 100 watt halide ballast. The ballast should match the wattage of the bulb to ensure proper operation and to avoid potential damage to the bulb and ballast. It is best to use a ballast that is rated for the wattage of the bulb being used.
Can you use a 65 watt fluorescent bulb in a metal halide light fixture?
No, the ballast's output is not matched to operate a fluorescent bulb.
Can a 175 watt metal halide bulb be used in a 100 watt ballast fixture?
No, a 175-watt metal halide bulb should not be used in a 100-watt ballast fixture. The wattage of the bulb must match the ballast's rating for optimal performance and safety. Using a bulb with a higher wattage than the ballast can lead to overheating, reduced lifespan, and potential damage to both the bulb and the ballast. Always ensure compatibility between the bulb and ballast specifications.
Can you use a 400W high pressure sodium bulb in a metal halide ballast?
No, the ballast has to be matched to the lamp. 250 watt ballast, 250 watt lamp. Also be sure to match the lamp type to the proper ballast even though the wattage is the same. HPS ballast to HPS lamp, Metal halide ballast to metal halide lamp and mercury vapour lamp to mercury vapour ballast.
How many fluorescent tubes equal 1000 watt metal halide light?
It would depend on the wattage of the fluorescent tubes. As a rough estimate, you would need about 6-8 standard 40-watt fluorescent tubes to approximate the light output of a 1000-watt metal halide bulb.
How many lumen in 100 watt metal halide?
A 100-watt metal halide lamp typically produces around 8,000 to 10,000 lumens, depending on the specific design and efficiency of the bulb. This lumen output can vary based on factors such as the manufacturer and the lamp's age. Metal halide lamps are known for their bright, white light, making them popular for outdoor and commercial lighting applications.
Can a 75 watt metal halide light be safely replaced with a lower wattage?
Some light fixture are configured for multi wattage bulbs but as a general rule of thumb only replace a bulb with the fixtures recommended bulb other wise there are serious safety issues including bulb explosion and fire.
What is the lumen's of a 70 watt metal halide lamp?
6000lm
Can you use a 70 watt high pressure sodium bulb in a 100 watt ballast?
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
Can you use a 400 watt multivapor bulb in a 400 watt metal halide ballast?
Yes U can just make sure they are the same size (watts) and base configuration (R59) or so.
