answersLogoWhite

0

Yes you can. The maximum charge current for LiPo batteries is '1C' where 'C' is the capacity of the battery in question, in your case C is 2000mAH. So you will be charging at 0.5C which is fine.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Natural Sciences

How do you drop 12vdc 1000mA charger to 12vdc 500mA for 12v 7Ahr battery?

The current rating on a charger ("1000 mA", "500 mA"), usually means the currentthat the charger is capable of supplying if it needs to. It's NOT the current that'salways being pumped out.If your 7AH battery needs 500 mA at some time during the charging operation,then a 1000mA charger is capable of supplying it.


5.1v is the Voltage, You need to also look at what the Amperage rating is on the charger. 500ma, 1000ma, etc. How many Milliamps?

5.1v is the Voltage, You need to also look at what the Amperage rating is on the charger. 500ma, 1000ma, etc. How many Milliamps?


What is maximum current of 9 volt dc battry?

The maximum current capacity of a 9-volt DC battery will depend on the specific type and size of the battery. However, for a typical alkaline 9-volt battery, the maximum current output can range from around 500mA to 1000mA. It is important to check the specifications provided by the manufacturer for the exact current rating of the specific battery model.


How many amps is 250 mA?

There are 1000mA in one amp. So there is 0.25 amp in 250 mA.


Can a 9 volt 1000 m a adapter replace a 9 volt 200 m a adapter- the polarity is the same-this is not bein used as a charger its being used to power a guitar effect pedal in place of 9volt battery?

Some 9 V adapters rated for 1000 mA will provide 9 V at 1000 mA. If you use it on a 200mA device the voltage may go up to 10-15 V and if that device can not handle the higher voltage, it it could burn out. Better adapters will only put out 9 V exactly and have no problem. Be careful of revere polarity where the positive on one is the negative pin for the other adapter.

Related Questions

Will a 5.0v 1000mA charger, charge 5.0v 2.1A device?

no


How do you drop 12vdc 1000mA charger to 12vdc 500mA for 12v 7Ahr battery?

The current rating on a charger ("1000 mA", "500 mA"), usually means the currentthat the charger is capable of supplying if it needs to. It's NOT the current that'salways being pumped out.If your 7AH battery needs 500 mA at some time during the charging operation,then a 1000mA charger is capable of supplying it.


5.1v is the Voltage, You need to also look at what the Amperage rating is on the charger. 500ma, 1000ma, etc. How many Milliamps?

5.1v is the Voltage, You need to also look at what the Amperage rating is on the charger. 500ma, 1000ma, etc. How many Milliamps?


Can you use 750mA output charger that calls for 1000mA?

Yes - it will just take a little longer to charge the device.


Will a 12v lithium battery rated at 1000ma run a 12v 100w light bulb?

no


How do you make a battery solution for a device requiring 9v 1000mA power?

You would need a combination of batteries delivering nine volts at one amp.


Does 1000mA equal 1A?

Yes. mA means milliAmperes. one milli is one/one thousand so 1000mA is 1 Ampere


What ac charger should be used for versalite 1.5 million candle power spotlite?

Here is the information that I got off mine: Class 2 Transformer 13VDC 1000mA Model: SADC-0891 The plug that goes into the spotlight is 5mm


What is 0.7 mA?

mA = milliAmperes 1000mA = 1 A


What is maximum current of 9 volt dc battry?

The maximum current capacity of a 9-volt DC battery will depend on the specific type and size of the battery. However, for a typical alkaline 9-volt battery, the maximum current output can range from around 500mA to 1000mA. It is important to check the specifications provided by the manufacturer for the exact current rating of the specific battery model.


For a device requiring DC 6V 1000mA will a DC adapter output 9V 1000mA also work for this device?

A device which requires 1000mA at 9 volts in order to operate will not work from an output of 500mA. This output is only half the power requirement of the device.


Can you use a 12v 1000mA on a device that requires 600mA?

yes this will work fine