It could run a 7-HP motor but the voltage has to be right.
Yes, but it would have to be a pretty big and expensive wind generator. You would need an inverter to produce at least 500 watts of 3 phase power. Unless you also had some big batteries, you could only run your motor when the wind is blowing!
Yes, a 2800 watt generator should be able to run a 550 watt electric cement mixer motor. The generator's wattage is more than enough to power the motor with some extra capacity for other devices. Be sure to check the starting wattage of the motor as well to ensure the generator can handle the initial surge of power needed.
A 15 KW generator won't likely run everything in your house, but besides that it is not efficient. You will be using more electricity to run the generator than the power would deliver. You also defeat the reason for the generator - run your house when power goes out. Now if you had a wind turbine turning a generator you have a positive contribution to house power. This is how wind power works. There are also lots of issues associated with a power transfer switch and feeding power back into the grid.
Armature amps refer to the current flowing through the armature winding of an electric motor or generator. It is used to power the electromagnetic coils that generate the magnetic field needed for the motor or generator to operate efficiently. Monitoring armature amps is crucial for maintaining the proper functioning and performance of the motor or generator.
Watts = amps x volts. 1000/120 = 8.3. Assuming the oil burner motor is 120V then the generator has the ability to produce 8.3 amps. Find the amperage on the burner pump motor, if it is in this range it will work. The closer the pump amperage is to the generator output the more effect it will have on slowing the generator down on the start. Motors draw up to 300% on start up, this is what makes the generator lag when a motor is connected as a load.
Yes, by giving mechanical power to motor . It acts as a Generator.
simply put a motor consumes power and a generator produces it. reactance of a generator = - reactance of a motor
There is no way to answer without knowing the wattage rating of the 9 volt generator. A generator's wattage rating depends on the size of the wire in it, the wattage of the rectifiers if it is a DC generator, and the horse power of the engine or motor that is available to turn the generator.
A generator converts mechanical power into electrical power. A motor converts electrical power into mechanical power.
AC motor produce mechanical power and absorbed electric energy the power generator produce electrical power absorbed mechanical power
I think it can work with a certain type of generator and an electric motor like one that uses 300w/h The idea is to run a generator that can produce more electricity than needed to run the motor that is powering it.
You can't use a motor to power a generator and use the output of that generator to power the motor. Some energy will be lost at each step making the hookup pointless. But you can use a combustion engine to power an electric generator and use that electricity to power auxillary systems around the engine.
What mph compare to a 3.3 horse power outboard motor
Yes, but it would have to be a pretty big and expensive wind generator. You would need an inverter to produce at least 500 watts of 3 phase power. Unless you also had some big batteries, you could only run your motor when the wind is blowing!
A generator is a back up of power. A generator can only give so much voltage.
Yes, but the power you get out will be much less than the power you put into the motor.
About 8hp (5 kW).