No, a double pole 50 amp breaker protects a 240 volt supply at 50 amps. The number that is on the handle of the breaker is the amperage that the breaker will trip at if an overload occurs on the circuit.
A 15-amp circuit breaker is typically used for a well pump that operates on a 120-volt power supply. For well pumps that operate on a 240-volt power supply, a 20-amp circuit breaker is typically used. It's important to check the manufacturer's specifications for the exact amp rating required for your specific well pump.
No. The breaker must protect the circuit components such as wiring, outlets and switches that are connected to the breaker. Therefore if you have a 30 amp circuit as dictated by its components you need to protect it with a 30 amp or less breaker.
A circuit breaker protects the wires that the devices are connected to. If the devices that are connected to the circuit are 20 amps the wire size should be #12 wire fed from a 20 amp breaker. This breaker should not trip unless the circuit is overloaded or a fault occurs on the circuit. If the devices that are connected to the circuit are15 amps the wire size should be #14 wire fed from a15 amp breaker. This breaker should not trip unless the circuit is overloaded or a fault occurs on the circuit. Putting 20 amp sockets on this 15 amp circuit will work but the circuit is limited to the amount of load that can be plugged in. You will not get the full capacity of the 20 socket because the breaker will trip at 15 amps.
No tandem breakers are of the same value.
No, a double pole 50 amp breaker protects a 240 volt supply at 50 amps. The number that is on the handle of the breaker is the amperage that the breaker will trip at if an overload occurs on the circuit.
A 15-amp circuit breaker is typically used for a well pump that operates on a 120-volt power supply. For well pumps that operate on a 240-volt power supply, a 20-amp circuit breaker is typically used. It's important to check the manufacturer's specifications for the exact amp rating required for your specific well pump.
Replace the 30 Amp Breaker with a 15 Amp breaker.
It depends on how much current each computer draws. An average rating for a computer power supply for a home computer is about 250 watts. A 20 amp circuit breaker can handle about 8 of this type of computer.
No. The breaker must protect the circuit components such as wiring, outlets and switches that are connected to the breaker. Therefore if you have a 30 amp circuit as dictated by its components you need to protect it with a 30 amp or less breaker.
Not unless you change the wiring for that circuit. The breaker protects the wiring and if you install a 40 amp breaker on a 15 amp wire circuit you will have a fire in your home.
The maximum amperage capacity of a 150 amp circuit breaker is 150 amps.
The maximum amperage capacity of a 30 amp circuit breaker is 30 amps.
The maximum current rating for a 15 amp circuit breaker is 15 amps.
The maximum amperage capacity of a 60 amp circuit breaker is 60 amps.
The maximum amperage capacity of a 90 amp circuit breaker is 90 amps.
The maximum current capacity of a 100 amp circuit breaker is 100 amps.