0
I lived in Denver City, Texas in July 1994 and a pit filled with sulfur which contain mercaptan, as it is found in the production of oil and gas. This pit full of sulfur was the results of Shell Oil Company processing Hydrogen Sulfide Gas into sulfur. this process also contained some Mercaptans (Sulfur plus methane gas molecule). In July 1994 this pit caught on fire with no known cause. The pit was an open pit and if you came close to it you could smell the mercaptans. The official cause was that lightning but if you have ever been around liquid mercaptans you would that it can catch on fire with ease.
stallingssd@cox.net
Ethyl mercaptan will burn quite readily. It wouldn't be a very good additive for gas if it didn't. It will also autoignite. The temperature required is relatively high. Autoignition is the temperature at which a material will burn when heated to and is typically tested by taking a drop of a material and dropping it into a vessel at a known temperature. If it ignites when it hits the bottom of the vessel, the autoignition temperature has been exceeded. Most sulfur doesn't contain a lot more hydrogen sulfide than they do mercaptan.
What else can I help you with?
Does ethyl mercaptan have an oily type substance that it produces?
Ethyl mercaptan is not an oil.
Ethyl mercaptan percent concentration with natural GAS?
None. Ethyl mercaptan is not used to odorize natural gas. The normal odorant used for natural gas is tertiary butyl mercaptan, which is present at a concentration of approximately 0.5 pound/million standard cubic feet of gas.
Is mercaptan flamable?
Yes, mercaptan is flammable. It is a sulfur-containing organic compound that can ignite and burn in the presence of an open flame or high heat. Proper safety precautions should be taken when handling mercaptan, as its flammability and strong odor can pose risks in various environments.
If you inject the smelling agent Ethyl Mercaptan into propane will it be toxic and adhere itself to the metal tank?
When produced propane and butane is odorless and colorless. Ethyl mercaptan is the odorant added to propane and butane in the processing and refining process to provide a detectable odor. Under certain conditions the odorant in propane may oxidize and lose its destictive odor. This odor fade can occur in new steel containers when first placed into service and in older steel containers that have been left open to the atmosphere. Air, water, or rust in a propane tank or cylinder can also reduce propane odor concentration. Ethyl mercaptan is toxic although the amount added to propane is non-threatening.
When was mercaptan first used in natural gas?
"Historically, first gas odorization was carried out in Germany in 1880's by Von Quaglio who used ethyl mercaptan for detecting gas leakages of blue water gas."
Does ethyl mercaptan have an oily type substance that it produces?
Ethyl mercaptan is not an oil.
What is the substitution chemical to ethyl mercaptan in LPG?
Tetrahydrothiophene and amyl mercaptan are examples; but ethyl mercaptan is preferred now.
What does one pint of ethyl mercaptan weigh?
One pint of ethyl mercaptan weighs approximately 1.25 pounds (or about 0.57 kilograms). This weight can vary slightly based on temperature and pressure, as well as the specific formulation of the ethyl mercaptan. Ethyl mercaptan has a density of around 0.85 g/cm³, which contributes to this weight estimate.
Where can you buy ethyl mercaptan?
chevron
Is the ethyl mercaptan of any harm for humans?
.
What chemical is put into methane to make it smell?
Ethyl mercaptan
What are the various uses of ethyl mercaptan in different industries?
Ethyl mercaptan is commonly used as an odorant in industries such as natural gas, petroleum, and chemical manufacturing. It is added to these substances to give them a distinct smell, making it easier to detect leaks or spills. Additionally, ethyl mercaptan is used in the production of pesticides, pharmaceuticals, and as a chemical intermediate in various processes.
Which thing is put in lpg gas to smell?
This substance is ethyl mercaptan.
Which compound is added to LPG to detect its leakage?
A compound called mercaptan is added to LPG to detect its leakage. Mercaptan is a sulfur-containing compound that gives LPG a distinctive smell, making it easier to detect any leaks as it has a strong odor.
What is the odor component added in lpg?
ethanithiol ( IUPAC) ethyl mercaptan is added in lpg to detect leakage by the odour.
Ethyl mercaptan percent concentration with natural GAS?
None. Ethyl mercaptan is not used to odorize natural gas. The normal odorant used for natural gas is tertiary butyl mercaptan, which is present at a concentration of approximately 0.5 pound/million standard cubic feet of gas.
Is mercaptan flamable?
Yes, mercaptan is flammable. It is a sulfur-containing organic compound that can ignite and burn in the presence of an open flame or high heat. Proper safety precautions should be taken when handling mercaptan, as its flammability and strong odor can pose risks in various environments.
