answersLogoWhite

0

Yes, but it is difficult because if you get the pitch wrong they will actually be worse. Most mom and pop type sporting goods stores have a blade exchange where you can leave your old blade and get a resharpened one at a reduced cost.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Natural Sciences

Jiffy ice augers why does your auger bind?

Jiffy ice augers can bind due to several reasons, including ice buildup on the blades, dull blades, or a misaligned blade. Regular maintenance, such as keeping the blades sharp and clear of ice, can help prevent binding issues. If the auger continues to bind, it may be best to have it inspected by a professional to identify the specific cause.


Can a person make a motorised ice auger using a homelite gas trimmer motor and the auger from a hand powered ice auger?

Yes, it is possible to make a motorized ice auger using a Homelite gas trimmer motor and the auger from a hand-powered ice auger. You would need to adapt the motor to fit the auger and ensure that the motor has enough power to turn the auger effectively through the ice. It may require some engineering and modifications, but it can be done with the right skills and tools.


What other tools would a person need to make a motorised ice auger using a homelite gas trimmer motor and the auger from a hand powered ice auger?

Probably would need some kind of gearbox reduction. A motor of a weedeater would be spinning the auger blade at such a high rpm I think it might bog down as soon as you hit the ice with it. Rotatiller motors have a gearbox reduction on them already. What size cc is the engine?


What is the best temperature for Ice fishing?

The best temperature for ice fishing is typically between 20 to 30 degrees Fahrenheit. This range ensures that the ice is thick enough to support your weight and that the fish are active under the ice. It's important to always check the ice thickness and quality before venturing out.


Why does ice make popping noises when you're ice fishing?

When ice forms and expands, it puts stress on the existing ice and may cause it to crack or pop. Temperature changes, wind, and shifting weight on the ice can also contribute to the popping noises when ice fishing. These sounds usually indicate normal ice movement and are not necessarily dangerous.

Related Questions

Do ice skates with double runner blades need to be sharpened?

No, they do not to be sharpened. They're not really skates. The kids just use them to get used to standing on the ice, and to walk in them on the ice.


Jiffy ice augers why does your auger bind?

Jiffy ice augers can bind due to several reasons, including ice buildup on the blades, dull blades, or a misaligned blade. Regular maintenance, such as keeping the blades sharp and clear of ice, can help prevent binding issues. If the auger continues to bind, it may be best to have it inspected by a professional to identify the specific cause.


Where offline can an ice fisherman purchase an ice fishing auger?

The best deals to find an auger can be found online. However, that may not be an option for many ice fishermen. Then they would be able to go to a store such as Cabella's or Dick's Sporting Goods and find an ice auger there.


What is a hand ice auger?

A hand ice auger is a tool that is used to cut a circle hole in the ice for ice fishing and checking ice depths. The hand auger is manual and does not have a motor so the user has to turn it.


Where can one purchase an auger for ice fishing?

Augers for ice fishing can be purchased in stores such as Bass Pro Shop and Cabelas. They can also be purchased online from websites like Amazon or eBay.


What is used to chop ice when ice fishing?

You can use an ice chisel, however.......A good ice auger even a hand unit is the way to go. Cost is under $100. If you really want to ice fish seriously, a gas auger is the way to go. They make even thick ice a breeze.


What type of ice fishing gear should a novice buy?

For those interesting in going ice fishing, there is certain equipment needed unique from regular fishing. First and foremost, warm clothes and waterproof boots are needed for the weather. From there, an ice auger is needed to drill holes to enable the rod and reel to get into the water.


Can a person make a motorised ice auger using a homelite gas trimmer motor and the auger from a hand powered ice auger?

Yes, it is possible to make a motorized ice auger using a Homelite gas trimmer motor and the auger from a hand-powered ice auger. You would need to adapt the motor to fit the auger and ensure that the motor has enough power to turn the auger effectively through the ice. It may require some engineering and modifications, but it can be done with the right skills and tools.


What do ice fishers use to cut a hole in the ice?

an auger


How do you use a hand ice auger?

Always check equipment first to make sure the blades are sharp. brush away the snow that covers they area where the drill is to take place. Adjust the handle height and lean on its top. Apply steady pressure as the auger is turned. It's pushed all the way down into the hole after the ice is broken.


Where would one find a Jiffy ice auger?

You can find a Jiffy Ice Auger online at the Jiffy On Ice website. You can also purchase one from personal sellers through websites such as Craigslist or eBay.


Jiffy ice auger ceriel number lookup?

85935