answersLogoWhite

0

It depends

Yes you can if the roof can support the Genset. But roof mounts are rare. Because of the extra effert required to service them. I have serviced some in my time. But the bill would have been a lot smaller.If they had been on the ground.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Natural Sciences

Do you need an electrician to install a portable generator?

Yes, you need an electrician to install a power generator and it is very important that he is licensed otherwise it would not work/is not legal. Hire the licensed electrician to install a transfer switch.


What is the purpose of a top plate?

A top plate is a horizontal framing member that sits at the top of a wall. Its main purpose is to provide a surface for attaching ceiling joists or rafters to create a secure connection between the wall and the roof structure, as well as to help distribute the load of the roof evenly along the top of the wall.


Is it possible to install solar panels on a flat roof?

Yes, it is possible to install solar panels on a flat roof. However, the angle of the panels may need to be adjusted to maximize sunlight exposure and energy production. Additionally, ballast or mounting systems can be used to secure the panels in place on a flat surface.


Can you install 60 amps generator and only get 50 amps AC power at 110 - 240 volts?

If you need 50 amps you can use a 60 amp generator or any other generator rated to supply more amps. The voltage, 110 v or 240 v, must be the right voltage for the load used.


How can you temp wire a generator to your meter?

It is not safe or recommended to directly wire a generator to your meter. Doing so can cause serious safety hazards, damage to your electrical system, and is also illegal in many jurisdictions. It is important to consult a licensed electrician to properly install a transfer switch or interlock device to safely connect a generator to your home.

Related Questions

Can you install roof racks on a 2010 Subaru Forester?

Yes you can. If you look on top of your vehicle, the passenger side and driver side shoulder have two rectangular slot each where you remove and install the roof rack.


What is a contract that performs emergency generator installation?

You can find a contractor to install your generator at clowelectrics.com. They have many experienced contractors to install your generator at your home.


Name of Things that are on top of house?

it is the roof that is what on the top a roof


Is a Mansard roof difficult to install?

A mansard roof is difficult to install due to its shape and structure. What makes a mansard roof so difficult to install is that there are 4 sides all of which have different slopes.


How do you properly install a wind power generator and how much does it typically cost?

To properly install a wind power generator, it will typically cost around 40,000 dollars to install a generator that is large enough to power the entire home.


How to install a generator to a house?

To install a generator to a house, follow these steps: Choose a suitable location for the generator outside the house. Install a transfer switch to connect the generator to the electrical panel. Connect the generator to the transfer switch using appropriate wiring. Test the generator to ensure it is functioning properly. Follow all safety guidelines and regulations during installation.


How much to install a asphalt arch30 year roof?

To install the Asphalt Arc30 year roof depends with the materials that you will use.


How can I learn how to install a generator?

To learn how to install a generator, you can start by researching online tutorials, taking a course on generator installation, or seeking guidance from a professional electrician. It's important to follow safety guidelines and local regulations when installing a generator.


How can one install roof flashing?

One can install roof flashing by various steps. You can find these steps on several websites. A website you can look on for installing roof flashing is YouTube.


How do you install a skylight?

Install the sill flashing first, according to the manufacturer's instructions. As a rule, flashings are nailed into the curb and sometimes cemented to the roof with plastic roof cement, but not nailed to the roof.


Would it be legal to install a radioisotope thermoelectric generator in a residential home?

Oy! He wants to install a nuclear reactor in his basement. What is the world coming to? (Pardon me. I've been watching Fiddler on the Roof. And yes I know a RTG ain't exactly a reactor. But still...) No, that would not be legal.


How to install a skylight in a room?

To install a skylight in a room, first choose the location on the roof where you want to place it. Cut a hole in the roof and frame it with a curb. Install the skylight flashing kit around the curb to prevent leaks. Place the skylight on top of the curb and secure it in place. Finally, seal around the edges with roofing cement to ensure it is watertight.