0
Probably yes. The 12v 2 amp adapter can put out 12x2=24 watts. The 60w adapter can handle more than twice the power (60 / 12 = 5 amps). However, the voltage of inexpensive adapters may be quite a bit higher under low loads. I'd check and make sure the voltage was not very much greater than 12 volts with a 2 amp load.
What else can I help you with?
Can you put 12V 50W light to 12v ac 2A adaptor?
No, you should not connect a 12V 50W light directly to a 12V AC 2A adaptor. The light requires a higher wattage than the adaptor can provide, which can damage both the light and the adaptor. You should use an adaptor that can supply the correct voltage and wattage for the light.
What will happen if use a 12v 400ma instead of 12v 500ma?
i am not sure, BUT according to the answer in this post:Can_you_use_a_9V_600mA_adapter_on_a_9V_400ma_scanneryou need an adaptor of 9v and AT LEAST 500mA (assuming that the appliance draws 500mA)
Can you use a 12v 500mA switching adapter going to a 12v 700mA security camera?
If the camera actually uses 700 mA in order to do its job, then the 500 mA adaptor will warm up, then overheat, and eventually fail.
What if you use a 20V adaptor for a 12V machine?
Using a 20V adapter for a 12V machine can potentially damage the machine due to overvoltage. The machine might not be able to handle the higher voltage, leading to malfunctions or even permanent damage. It is important to use the correct voltage adapter to ensure the proper functioning and safety of the machine.
Does a 100w lamp use more energy than two 60w lamps?
NO. Two 60W lamps will use 120W - which is more than 100W !!
Can you put 12V 50W light to 12v ac 2A adaptor?
No, you should not connect a 12V 50W light directly to a 12V AC 2A adaptor. The light requires a higher wattage than the adaptor can provide, which can damage both the light and the adaptor. You should use an adaptor that can supply the correct voltage and wattage for the light.
Can you use a 12v-0.6a 7.2va adaptor instead of a 12v 1.5a adaptor?
No, you cannot use a 12V 0.6A (7.2W) adapter instead of a 12V 1.5A adapter. The 0.6A adapter provides insufficient current for devices that require 1.5A, potentially leading to underperformance or damage to the device due to inadequate power supply. Always match the voltage and ensure the current rating of the adapter meets or exceeds the device's requirements.
What will happen if use a 12v 400ma instead of 12v 500ma?
i am not sure, BUT according to the answer in this post:Can_you_use_a_9V_600mA_adapter_on_a_9V_400ma_scanneryou need an adaptor of 9v and AT LEAST 500mA (assuming that the appliance draws 500mA)
Can you use a 12v 500mA switching adapter going to a 12v 700mA security camera?
If the camera actually uses 700 mA in order to do its job, then the 500 mA adaptor will warm up, then overheat, and eventually fail.
Can I use 4.5 volt 2 ampere adaptor instead of 5 volt 2 ampere?
yes you can.
Can 9V 1A router adaptor be used for 12V router adaptor?
No, a 9V 1A router adapter cannot be used for a 12V router. The voltage rating is critical, and using a lower voltage can lead to insufficient power supply, potentially causing the router to malfunction. Additionally, the 1A current rating may not meet the power requirements of the 12V router, risking damage to the device. Always use an adapter that matches the specified voltage and current ratings for optimal performance and safety.
What if you use a 20V adaptor for a 12V machine?
Using a 20V adapter for a 12V machine can potentially damage the machine due to overvoltage. The machine might not be able to handle the higher voltage, leading to malfunctions or even permanent damage. It is important to use the correct voltage adapter to ensure the proper functioning and safety of the machine.
Can you use a 10v phone charger instead of using a 12v charger?
You can - but it will take longer for the phone to charge.
What would happen if you used a 600mA adaptor instead of a 500mA?
Using a 600mA adaptor instead of a 500mA one could potentially supply more current to the device than it is designed for. Depending on the device's circuitry, this can lead to overheating and damage, especially if the device is not designed to handle the extra current. It's generally safer to use an adaptor with the recommended current rating for the device.
Does a 100w lamp use more energy than two 60w lamps?
NO. Two 60W lamps will use 120W - which is more than 100W !!
Can I use a 12v 7ah battery instead of a 12v 12ah battery?
Yes, you can use a 12V 7Ah battery instead of a 12V 12Ah battery, but there are important considerations. The 7Ah battery will provide a shorter runtime and may not meet the power demands of your device if it requires consistent output. Additionally, ensure the discharge rate is compatible with your application to avoid damaging the battery. If your usage exceeds the 7Ah capacity, it may lead to quicker depletion and potential over-discharge.
Can you use 15V 4A adaptor for your laptop instead of 19V 3.42A?
No. The machine will notice that it isn't getting all the required voltage and won't run.
