Romex, or non-metallic sheathed cable (NM cable), is generally not permitted for use in commercial buildings due to stricter electrical codes and regulations that apply to commercial installations. Instead, commercial buildings typically require the use of conduit systems or other types of wiring methods that provide greater protection and durability. Always consult local building codes and a licensed electrician to ensure compliance with applicable regulations.
It depends on your local building code.
No, it is not possible to run Romex wire directly underground in a basement. Romex wire is not rated for direct burial underground and should not be used in this application. Instead, you should use UF-B (underground feeder) cable or conduit with appropriate wiring for underground installations.
No, Romex cable is not allowed to be run inside conduit. Romex cable is intended to be used in exposed or concealed applications within buildings. If conduit is used, it should contain individual THHN/THWN wires instead of Romex cable.
A commercial building is a property used primarily for conducting business activities or providing services rather than for residential purposes. Examples include office buildings, retail spaces, hotels, and warehouses. Commercial buildings are designed to accommodate the specific needs of businesses and may include features such as open floor plans, loading docks, or specialized equipment.
about 2 PSI
Romex, or non-metallic sheathed cable (NM), is generally not permitted for use in commercial buildings or in residential buildings over three stories according to the National Electrical Code (NEC). For taller structures, conduit systems or other types of wiring methods are typically required to ensure safety and compliance with local codes. Always consult local building codes and regulations, as they may have specific requirements for electrical installations.
No, Romex wiring cannot be run in conduit as it is not designed or approved for use in conduit.
Yes, it is generally not permissible to run Romex cable in conduit because Romex is already insulated and designed for use without additional protection. Running Romex in conduit can lead to overheating and potential fire hazards.
The advantages of using Romex conduit for electrical wiring installations include easier installation, protection of wires from damage, and compliance with building codes.
Depends on the state you live in and the local regulations.
Yes, it is generally not recommended to put Romex wiring inside conduit as it can cause overheating and potential safety hazards. Romex wiring is typically designed for use without conduit.
It depends on your local building code.
A commercial building , is a building that has only commercial offices in it.
For a 20 amp circuit, it is recommended to use 12-gauge Romex wiring. Romex is a brand of non-metallic sheathed cable commonly used for residential electrical wiring.
The Romex amp chart provides information on the maximum electrical current that different types of Romex cables can safely carry. This helps users determine the appropriate cable to use for specific electrical applications based on the ampacity rating.
Yes, you can use Romex (non-metallic sheathed cable) inside PVC conduit, but it is generally not recommended for several reasons. Romex is designed for direct burial or surface mounting and may not be suitable for conduit applications where moisture or physical damage could occur. Additionally, local electrical codes may have specific regulations regarding the use of Romex in conduit, so it's essential to check those before proceeding. Always consult with a qualified electrician or local code authority for guidance.
for use byprofessionals like in tool http://wiki.answers.com/Q/FAQ/2639-89smeans contractors and roofers ,builders ect. or by a business. when a company like wal-mart, Costco builds a building it is called a commercial building