0
What else can I help you with?
What is the density of SS321?
Stainless Steel 321 has density of 0.29 pounds per cubic inch, which is 8.0272 grams per cubic cm.
Are copper pans all right to cook in if there is a copper tint to the stainless steel?
To manufacture the stainless steel copper bottom utensils with 3% of copper deposit at the bottom of utensil & the grade of stainless steel is J -5 of 22 gauge. What would be the manufacturing cost per kg ? Shall I get the costing analysis of manufacturing process to know this process better.What kind of stainless steel grade have to be used to get best resuts? Ravikumar
What kind of drill bit is used to drill stainless steel plate and which is coolant used for stainless steel drilling?
My favorite is simply a high speed steel drill bit, running at SLOW speed (slower than you'd run if drilling mild steel) using green goo as a lubricant called "Westlube" made by Westland Products Company. http://www.westlandproducts.com/ In our operation Westlube changed things from 2-3 holes per drill bit to hundreds of holes per drill bit. For stainless, it's purely magic!
What is the best measurement to calculate steel cost?
That depends upon so many factors. Are you buying plate, sheet, structural steel? Most steel (in the US) is sold by the hundred weight, cwt. You can also buy it by the foot, square foot, pound, each, etc. Stainless steel runs about 5 times mild hot rolled steel. Cold finished, turned ground and polished bar stock also costs more, typically, than mild steel. Also, steel prices have fallen rapidly in recent months, and there is variation in price from one place to another, of course. If you want to keep your cost low you might request a commercial quality grade. If your application is more specialized, such as firebox steel for stoves, or abrasion resistant steel like T1 (A514), you can expect to pay more. A typical mild steel bar might cost around $100 per hundred pounds. You can often negotiate a better price by buying in quantity.
How much does spoons cost?
The cost of spoons can vary depending on the material, brand, and quality. On average, a basic stainless steel spoon can cost around $1-3 per piece, while higher-quality or specialty spoons can cost $5 or more. Sets of spoons are also available, with prices ranging from $10 to $50 or more depending on the number and type of spoons included.
Can stainless steel piping be seamless?
Yes! Per ASTM A 312 in 304/304L and 316/316L.
What is the cost of stainless steel per kg?
£7000000000000000 per gram
How much does 316L cost per pound?
As of October 2023, the price of 316L stainless steel typically ranges from $2.50 to $5.00 per pound, depending on market conditions, quantity, and supplier. Prices can fluctuate based on factors such as demand, raw material costs, and geopolitical influences. For the most accurate pricing, it's advisable to check with suppliers or industry sources for current rates.
What is the thermal conductivity of stainless steel in watts per meter-kelvin?
The thermal conductivity of stainless steel is typically around 16 watts per meter-kelvin.
What is the speed of sound in stainless steel?
Sound velocity in steel - 5960 m/s Sound velocity in Stainless steel - 5760 m/s
What is the current price of stainless steel?
Current price of stainless steel as of May 24 2011 in the United States is around 70 cents per pound. There are various types of stainless steel such as 304, 316 etc. 304 stainles steel scrap will pay you less at the scrap yard then 316 stainless steel. Always know or have tested your stainless steel scrapbefore selling to the recycling yard.
Is PVC cheaper than stainless steel?
For 1/2" Schedule 40 piping, PVC can be as low as $0.35 per foot, while comparable size stainless steel pipe prices can be around $6.98 per foot. Western Steel Agency is a Top Stainless Steel Pipe Fittings Manufacturers in India.
Is mild steel better than stainless steel?
Per the attached related link, the density (hence weight) of stainless is slightly more than the mild carbon steel. Using about 8.03/7.84 ratio of density, for the same volume of material the stainless will weigh 2.4 % more.
What is the tensile strength of 304 stainless steel vs 316 stainless steel?
According to the Metals Handbook of the American Society of Testing and Materials, 316 Stainless has a tensile strength of 85,000 pounds per square inch.
What is the density of SS321?
Stainless Steel 321 has density of 0.29 pounds per cubic inch, which is 8.0272 grams per cubic cm.
What is current stainless steel scrap prices?
Stainless steel scrap prices can vary depending on the quality and type of stainless steel being scrapped, as well as market conditions. As of now, prices can range from around $0.30 to $1.00 per pound for stainless steel scrap. It's recommended to check with local scrap yards or online resources for the most up-to-date pricing information.
What is the cost of steel per ton?
The cost of steel per ton can vary depending on factors such as market demand, production capacity, and type of steel. As of 2021, the price of steel ranges from $500 to $1,500 per ton.
