0
What else can I help you with?
What is Duty cycle in mass spectrometry?
First off, the Duty cycle is the proportion of time during which a device or system is usefully operated. For a mass spectrometer, the duty cycle is the part of ions of a particular m/z produced in the source that are effectively analyzed.
What gauge of wire from the panel to the outlet would a 240V 52A rated welder require?
#6 You can use number 6 copper if you wish,you will definitely not overload it or you can figure the wire size by the duty cycle. If your welder has a 100 duty cycle rating use wire good for 52 amps or a number 6. If the duty cycle is 90, multiply the amp draw by .95 x 52 or 49.4 amps or a number 8 wire. These are a few more of the duty cycle multipliers 80 duty cycle(.89) 70 duty cycle(.84) 60 duty cycle(.78)Duty cycle takes in to account that most welders do not weld continously at maximum welder output all the time.
How many computer outlets can go on a 10 amp circuit?
About 8 amps worth, if you derate the circuit for 100 percent duty cycle.
What is the conductor size for a spot welder draw 90 amp with a duty cycle 40 percent?
To calculate the required conductor size for a spot welder drawing 90 amps with a 40% duty cycle, you need to account for the maximum current flow during operation. 90 amps * 1.5 = 135 amps (to accommodate the intermittent nature of spot welding). You would then use a conductor size based on a 135-amp current rating to ensure safety and efficiency in the electrical system.
How would you define tariff?
A tariff is a tax levied by the government on the importation of goods.
What is Duty cycle in digital logic?
duty cycle is the total on peeriod in one complete cycle.
What is the difference between the pulse width and the duty cycle of an injector?
Pulse width is the time in milliseconds that the injector is energized, the duty cycle is the percentage of on-time to total cycle time
How is width of pulse and power content is related?
The width of a pulse and power are related by a term called duty cycle. Full power means the pulse comes ON and Stays ON continuously for 100% duty cycle. No power means pulse is OFF continuously for a 0% duty cycle. 50% duty cycle means pulse stays ON half the time and OFF half the time. Duty cycle can be used to explain the relationship between pulse and power content.
What is duty cycle in radar?
Duty cycle is the fraction of time that a system is in an “active” state. ... The transmitter runs for one out of 100 microseconds or 1/100 of the time, and its duty cycle is therefore 1/100, or 1 percent. The duty cycle is used to calculate both the peak power and average power of radar system.
What is Duty cycle in mass spectrometry?
First off, the Duty cycle is the proportion of time during which a device or system is usefully operated. For a mass spectrometer, the duty cycle is the part of ions of a particular m/z produced in the source that are effectively analyzed.
What is the duty cycle of a docucolor Xerox?
The docucolor Xerox has a maximum duty cycle (number of prints) of up to approximately 200,000 pages per month.
Why must a welding machine's duty cycle never be exceeded?
Exceeding the duty cycle of a welding machine can lead to overheating of its components, causing damage and potential failure. The duty cycle provides a guideline for optimal performance and cooling, ensuring safe and efficient operation of the machine.
What is the deduction of crane ratings in duty cycle?
50%
The percentage or time a welder can operate without overheating is?
This is called the duty cycle. A machine with a 60 o/o duty cycle can weld continuously for 6 minutes out of 10.
What to do for obtaining 40 percent duty cycle with 555timer is it possible?
Place a diode in the circuit to bypass R2 during the charging cycle.. this will allow you to achieve duty cycles of < 50%
What is the duty cycle of a square wave that is positive for two horizontal divisions and at zero volts for four horizontal divisions?
The duty cycle is (positive time) divided by (total cycle time) = 2/6 = 1/3 or 33.3 %
How do you check the duty cycle on airfuel solenoid on 1985 Nissan 720 pickup?
To check the duty cycle on the air-fuel solenoid of a 1985 Nissan 720 pickup, you'll need a digital multimeter with a duty cycle measurement function. Connect the multimeter to the electrical connector of the solenoid while the engine is running, ensuring the meter is set to the appropriate setting for duty cycle. Observe the reading, which indicates the percentage of time the solenoid is activated during a specified period. A typical healthy duty cycle for this solenoid should be around 50%, but refer to the service manual for specific values for your model.
