Use mm instead of inces
Displacement doesn't translate directly to horsepower. That'll depend on the bore, stroke, and compression ratio.
a Ford 400 had a 4 inch bore and 4 inch stroke. Simplest math motor EVER!! Given 4" bore x 4" stroke x pi (3.14) x 8 cylinders = 402 cubic inches. Bore this thing out .060 and you get: 4.060 x 4 x 3.14 x 8 = 408 cubic inches.
NB stands for "Nominal Bore" and refers to the nominal size of the valve in a piping system, typically measured in inches. It represents the internal diameter of the valve or pipe. It is an important parameter used to select the right valve for a specific application.
Valve guide bore can be measured using a bore gauge. The bore gauge is inserted into the valve guide, and the measurement is taken by expanding the gauge until it makes contact with the inner walls of the guide. The bore diameter can then be read directly from the gauge.
Fluke can mean: * A fish, and a flatworm. * The end parts of an anchor. * The fins on a whale's tail. * A stroke of luck. Close (near) and Close (close the door) Bore a hole in something A tidal bore (tide meets river, pushes water back upstream) A crashing bore (someone who puts you to sleep) Bore (a burden) past tense of the verb to bear Bat- a type of animal, or a bat used in baseball
Bore 4.250" Stroke 4.00"
BORE is 3.740 and the stroke is 3.480
4.00 bore 3.48 stroke
4 inch bore, 3.5 inch stroke.
The bore would be 4.310" and the stroke is 4.00"
4.312 bore x 3.50 stroke.
cubic centimeters ANSWER Cubic centimetres when applied to an internal combustion engine refer to the "swept volume" of each cylinder, related to the bore and stroke (so the swept volume is worked out from pi times radius squared (remembering that bore and stroke are usually given in millimetres) times number of cylinders. This is then given as the "capacity" of the engine in ccs (technically under the Metric SI they are now written as cm3 (superscript 3 for cubed)).
4 inch bore. 2.87 inch stroke.
bore 3.497 stroke 3.81
bore is the diameter of the piston and stroke is the length the piston moves in the cylinder.for example if bore x stroke is 1x3 then 1 is the diameter of the piston and 3 is the length of the cylinder.if bore is greater than stroke then it is a short stroke engine.
4inch bore 3.25 stroke formula bore x bore times stroke times .7854= cid
3.498 bore with 4.25 stroke