answersLogoWhite

0

It depends if the short are before or after the device. The short circuit will cause high amperage trough the device and then blown. (JP)

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Natural Sciences

What devices shutdown immediately if a short circuit occurs?

A circuit breaker shuts down and can be reset. (A fuse does not "shutdown", it fails, or blows, or breaks and cannot be reused.) "Immediately" usually has a small delay and nothing is instantaneous.


What are 2 protective devices used to open a circuit?

The GSR plug is the newest device to perform this function. It becomes a mini circuit breaker for the circuit and is critical for high risk areas such as kitchens and bathrooms.The basic circuit breaker is another device. It opens the circuit when the amperage exceeds the rating of the breaker. It is a device that can be reset.The electrical fuse is the eldest of the devices. The disadvantage is that it must be replaced when the circuit is opened by overload.Circuit breakers and their cheap alternative, fuses, are used to disconnect the power if an excessive current flows.


What happens when a short circuit occurs in the oven?

A short circuit in an oven can cause the circuit to overload, leading to a sudden surge in electrical current. This can potentially damage the oven components, trip the circuit breaker or fuse, or even cause a fire. It is important to address the short circuit promptly to prevent any further damage or safety hazards.


What happens when power supply is overloaded?

When a power supply is overloaded, it can overheat and potentially fail. This can lead to damage to the connected devices, such as a short circuit or a power surge, which can result in data loss or hardware damage. It is important to ensure that the power supply is rated to handle the load requirements of all connected devices to prevent overloading.


How does circuit protection work in speaker selectors?

Circuit protection in speaker selectors typically involves components such as fuses, circuit breakers, or overload protection devices that are designed to interrupt the circuit in case of excessive current flow or a short circuit. These components help prevent damage to the selector and connected speakers by cutting off power in case of a fault, thereby protecting the system from potential electrical hazards.

Related Questions

How does a short circuit breaker work to prevent electrical fires and protect the circuit from damage?

A short circuit breaker works by detecting abnormal levels of electrical current in a circuit. When it senses a short circuit or overload, it quickly interrupts the flow of electricity to prevent overheating and potential fires. This helps protect the circuit and connected devices from damage.


What is the purpose of a circuit breaker in an electrical system, and how does it help to protect the circuit from overloads and short circuits?

A circuit breaker is a safety device that automatically cuts off the flow of electricity in a circuit when it detects an overload or a short circuit. This helps to protect the circuit and prevent damage to electrical devices or fires.


What effect does adding devices have on the resistance of the series circuit?

Many circuits have safety devices such as fuse. A fuse contains a substance that melts if it gets hot. if a short circuit happens, the heat causes the fuse to melt. The circuit is broken. because the current stops ,no damage is done.


What devices shutdown immediately if a short circuit occurs?

A circuit breaker shuts down and can be reset. (A fuse does not "shutdown", it fails, or blows, or breaks and cannot be reused.) "Immediately" usually has a small delay and nothing is instantaneous.


What causes a short circuits?

-circuit damage -overheating -fire or explosion causes a short circuit.


Why is my circuit breaker getting hot and tripping?

Your circuit breaker may be getting hot and tripping due to an overload of electrical current flowing through it. This can happen if you have too many devices plugged into the circuit or if there is a short circuit. It is important to address this issue promptly to prevent damage or fire hazards.


What are 2 protective devices used to open a circuit?

The GSR plug is the newest device to perform this function. It becomes a mini circuit breaker for the circuit and is critical for high risk areas such as kitchens and bathrooms.The basic circuit breaker is another device. It opens the circuit when the amperage exceeds the rating of the breaker. It is a device that can be reset.The electrical fuse is the eldest of the devices. The disadvantage is that it must be replaced when the circuit is opened by overload.Circuit breakers and their cheap alternative, fuses, are used to disconnect the power if an excessive current flows.


How do circuit breakers work to protect electrical circuits from overloads and short circuits?

Circuit breakers work by detecting when there is too much current flowing through a circuit. When this happens, the breaker automatically trips and interrupts the flow of electricity, preventing damage to the circuit and reducing the risk of fire. This helps protect electrical devices and wiring from overloads and short circuits.


Does electric dryer get damaged by short circuit in socket?

The fuse is there to disconnect the supply when there is a short circuit, before any damage is done.


What are the key differences between a circuit breaker and a surge protector, and how do they function to protect electrical systems from overloads and power surges?

A circuit breaker is a device that automatically shuts off the flow of electricity in a circuit when it detects an overload or short circuit. It is designed to prevent damage to the electrical system and reduce the risk of fire. On the other hand, a surge protector is a device that diverts excess voltage from power surges away from sensitive electronic devices. It acts as a barrier between the electrical outlet and the devices plugged into it, protecting them from damage caused by sudden spikes in voltage. In summary, while a circuit breaker protects against overloads and short circuits by cutting off the flow of electricity, a surge protector safeguards electronic devices from power surges by diverting excess voltage. Both devices play important roles in protecting electrical systems from potential damage.


Why is a short circuit dangerous?

A short circuit will draw a lot of current and produce heat so there is great danger of damage and even fire


What are the devices contain in a circuit breaker?

The devices contained in a circuit breaker consist of a bi metal strip for over load protection and a small wrap of wire in the form of a coil for magnetic short circuit trip.