Yes, air bubbles can rise to the surface of sandy clay when you pour water. This is due to the presence of air trapped within the pores of the clay matrix, which gets displaced by water as it infiltrates the soil. The bubbles coming out are a result of this air being released from the soil pores.
Cup
pour first water because acid will burst pour first water because acid will burst
pour it out from the table./
When water disappears from your hands under a hand dryer, it is being evaporated by the warm air produced by the dryer. The high temperature of the air helps to speed up the evaporation process, causing the water on your hands to turn into water vapor and dissipate into the air.
There is a large cooling system leak.
Yes. Water is actually needed for concrete to set and is vital to the curing process. Concrete will set just fine under water. Depending on your specific application (will all of the pour be under water or will it start under water and finish above the water line) you may need to adjust the initial dryness of the mix as well as take more care in the pour. All of the volume of the concrete that is under water shoudl be poured in continuous fashtion. If you must pour in steps, the start of the next pour must be "in" the old pour so as to not leave a water survice between the pours. This "seam" will tend to stay and produce a weaker stucture.
Yes, sand has a lot of air in it. That is why when you pour water on sand, the water goes right through it.
what air under water?????
you can not make air stay under water!
Yes, air bubbles can rise to the surface of sandy clay when you pour water. This is due to the presence of air trapped within the pores of the clay matrix, which gets displaced by water as it infiltrates the soil. The bubbles coming out are a result of this air being released from the soil pores.
Pour water in some wall then get fire and hold click under the water.
first you get some water then you pour it! first you get some water then you pour it! first you get some water then you pour it! first you get some water then you pour it!
Under water doesnt have enough air molucules that we need. Therefore we cant breath underwater. :)
It is difficult to pour water from a narrow necked bottle because the narrow opening restricts the flow of the water, causing it to pour out slowly. Additionally, air is unable to flow into the bottle quickly enough to replace the exiting water, creating a vacuum effect that further hinders the pouring process.
When water falls from a height, it traps air along with it, forming bubbles. This happens because the force of impact creates turbulence in the water, causing air from the surroundings to mix in and form bubbles as the water splashes.
Like water when you pour it down.