To demonstrate that a loudspeaker has a magnet, you can use a small ferromagnetic object, like a paperclip. Bring the paperclip close to the speaker; if it is attracted, this indicates the presence of a magnetic field, confirming that a magnet is inside. Additionally, you can disassemble the speaker (if possible) and visually inspect the components, where the magnet is typically found near the voice coil. Finally, measuring the speaker's impedance with a multimeter can also suggest the presence of a magnet, as it affects the electrical properties of the speaker.
The pattern around a magnet is called a magnetic field. The force of a magnetic field is strongest near the magnet and decreases with distance from the magnet. The force is also influenced by the orientation of the magnet and the material it is interacting with.
No, a magnet does not float on dry ice. Dry ice does not have magnetic properties and cannot support the weight of a magnet like a liquid nitrogen bath could.
They could be if you have magnetic powers
If you bring a magnet close to iron pieces, you will observe that the iron pieces will be pulled towards the magnet. This attraction occurs because iron is a ferromagnetic material, meaning it can be magnetized and is attracted to magnetic fields.
A magnet should have no effect on a cellphone. There is nothing inside a cellphone that would be "messed up" by a magnet. Perhaps you could clarify what happened.
Ask aba6iii :)!
Figure it out yourself
Electromagnets in a loudspeaker work by converting electrical signals into sound waves. When an electrical current flows through the coil of wire in the magnet, it creates a magnetic field that interacts with a permanent magnet to move the speaker cone back and forth. This movement generates vibrations in the air, which we perceive as sound.
The voice coil of a loudspeaker is placed in an annular space within the magnet assembly and is connected to the loudspeaker's paper cone. An audio signal creates a current in the coil and this generates a magnetic field around the coil which reacts with the permanent magnet of the woofer. The coil and cone move in and out like a piston in a car engine depending on the polarity of the audio signal. This is called the 'Motor effect' and is basically a linear motor.
1 example is an audio loudspeaker device because a coil and magnet is used to create the sound effect.
In a loudspeaker, electrical energy from an amplifier is converted into mechanical energy in the form of sound waves. This conversion occurs through the interaction of the electrical current with a magnet and a diaphragm, which causes vibrations that produce sound.
a speaker uses a voice coil a coil copper wire and a magnet and pole to vibrate a cone
A floppy disc use a magnetic pattern to store data, and loudspeakers are usually based around a (strong) magnet. The magnet can upset the magnetic pattern, making the data unreadable.
A loud speaker (like other speakers) produce sound (which is actually vibrations in the air heard by the ear) with a permanent magnet and a temporary magnet in wire form that is wrapped around the permanent magnet. (or a magnet that can be turned on and off by electricity) the speaker translates the sound into a series of electrical currents and then produces the electricity to alter the temporary magnet and making the magnets vibrate and in turn vibrates the air.
lg ks360 does have a loudspeaker !
up your neighbour's loudspeaker?
No, Loudspeaker is an output device.