0
What else can I help you with?
How many Nm do you need to turn a 5kw generator?
power=torque x speed p=txn 5000w= torque x angular speed if the speed of rotation is known, then from above formula we can find the minimum torque required to run the generator.
Full load torque of induction motor?
The full load torque of an induction motor is the maximum torque it can produce at its rated speed when operating at full load conditions. This torque is necessary to drive the load at the desired speed under normal operating conditions. It is an important parameter to consider when selecting a motor for a specific application.
Is eyesight speed equals to light speed?
There is no such concept as "eyesight speed"
What is the Speed ratio formula?
The speed ratio formula is the ratio of the speed of the output gear to the speed of the input gear in a gear system. It is calculated as the number of teeth on the input gear divided by the number of teeth on the output gear.
How does displacement affect the speed of hydraulic motor?
Displacement is the measure of how much fluid it takes to turn the hydraulic motor shaft per revolution. It is typically expressed in cubic inches or cubic centimeters per revolution. Given the same flow rate and pressure, a larger displacement motor will turn slower than a smaller displacement motor. A larger displacement motor will also produce higher torque than a smaller motor. So as displacement increases, torque goes up and speed goes down. This makes sense as torque multiplied by speed equals horse power. For a same input horsepower (pressure times flow), if one value did not vary as the inverse of the other, the conservation of power would not be met.
What is the torque on a torque converter?
Torque output of the engine at that speed.
What mechanism can increase torque speed?
One way to increase torque speed is by using a gearbox or gear reduction system. By changing the gear ratio between the input and output shafts, you can increase the speed of the output while reducing the torque. Additionally, increasing the voltage supplied to a motor can also increase its torque speed characteristics.
What is the relationship between input compared to the output shaft?
The relationship between the input and output shafts in a mechanical system, such as a gearbox or a motor, is defined by their rotational speed and torque. The input shaft provides power and motion, which is then transmitted to the output shaft. Depending on the design, this relationship can involve gear ratios that alter the speed and torque; for example, a higher gear ratio increases output speed while decreasing torque, and vice versa. This interplay is crucial for optimizing performance in various applications.
How many Nm do you need to turn a 5kw generator?
power=torque x speed p=txn 5000w= torque x angular speed if the speed of rotation is known, then from above formula we can find the minimum torque required to run the generator.
Is there anyway it increase the power out put of a motor?
The power output of a motor can be changed by the use of gears. Gears can be used to increase torque by reducing the speed of the output shaft by placing a large gear on the output shaft, coupled to a smaller gear. Conversely, by using a small gear on the output shaft, coupled to a larger gear, the speed can be increased with a reduction in torque.
How many horsepower equals 1 mph?
Ha Ha. two different measurements. Horsepower is a measurement of the torque your engine can produce, MPH is a measurement of speed. It is true you need horsepower to generate speed (MPH), and you can calculate the torque required if you have all the factors such as weight, air resistance, friction with road surface, etc.
What is the formula to calculate horsepower?
Horsepower can be calculated using the formula: Horsepower (HP) = (Torque (lb-ft) × RPM) / 5,252 where Torque is measured in pound-feet and RPM is the engine speed in revolutions per minute. This formula is commonly used in automotive applications to determine an engine's power output.
How does gear ratio affect torque in a mechanical system?
The gear ratio in a mechanical system affects torque by changing the relationship between the input and output speeds of the system. A higher gear ratio increases torque at the expense of speed, while a lower gear ratio increases speed at the expense of torque.
How do you find speed ratio?
The speed ratio is typically calculated by dividing the speed of the input gear by the speed of the output gear in a gear system. This helps determine how much the output gear rotates in relation to the input gear in a given amount of time.
How do you calculate distance?
We always calculate distance by multipying the speed by time. ex: I travelled in 10 min at the speed of 60km/h , so the distance equals to 60 times 10 which equals to 600 km....
How will the armature current and the output power of a dc shunt motors change with increasing load?
With increasing torque load the armature tends to slow down; the motor draws more current to compensate, and if there is armature resistance the back emf generated by the armature falls to allow the increased current to flow, which causes the motor to settle at a lower speed. The mechanical output power is the speed times the torque, and increasing the torque increases the power output provided the speed does not drop much.
What is meant by load on a motor in eletrical engineering term?
The load on a motor can be measured in watts, and it is the mechanical torque supplied, multiplied by the speed of the shaft. When the torque is in Newton-metres and the speed is in radians/second, the mechanical power output result is in watts.
