answersLogoWhite

0

Displacement is the measure of how much fluid it takes to turn the hydraulic motor shaft per revolution. It is typically expressed in cubic inches or cubic centimeters per revolution.

Given the same flow rate and pressure, a larger displacement motor will turn slower than a smaller displacement motor. A larger displacement motor will also produce higher torque than a smaller motor.

So as displacement increases, torque goes up and speed goes down. This makes sense as torque multiplied by speed equals horse power. For a same input horsepower (pressure times flow), if one value did not vary as the inverse of the other, the conservation of power would not be met.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Natural Sciences

What is motor shaft speed?

Motor shaft speed refers to the rotational speed of the motor's output shaft in revolutions per minute (RPM). It indicates how fast the motor is rotating and is a key parameter in determining the mechanical power output of the motor. Motor shaft speed is influenced by the frequency of the electrical power supplied to the motor and the motor's design specifications.


What happens to the speed of a three phase motor if frequency is increased?

If the frequency supplied to a three-phase motor is increased, the motor speed will also increase following the relationship known as the synchronous speed. This increase in frequency will lead to a corresponding increase in motor speed, assuming that the load on the motor remains constant.


What happens to the speed of light in motor oil?

As long as the light remains in the motor oil, nothing happens to its speed.


How do you reduce the speed of a 15 kW 3 phase motor without using variable speed control?

If the load is connected to the motor via belts, you can change the speed the load is turning by changing the pulley sizes. To get the load to slow down, increase the size of the pulley on the load; to get it to speed up, increase the size of the pulley on the motor. To reduce the speed of the motor itself, you'll have to alter the line frequency, which you can't do without a variable frequency drive attached to the motor.


How is speed calculate?

Average speed is calculated by dividing the total distance covered divided by the time taken. Instantaneous speed is calculated as the derivative of displacement with respect to time.

Related Questions

How does fixed displacement of hydraulic pump affect the speed of bent axis hydraulic motor?

The fixed displacement of a hydraulic pump determines the volume of hydraulic fluid it delivers with each rotation, directly influencing the speed of a bent axis hydraulic motor. Since the motor's speed is proportional to the flow rate provided by the pump, a fixed displacement pump will produce a consistent flow rate, resulting in a steady motor speed. However, if the load on the motor increases, the speed may decrease due to the pump's inability to provide additional flow. Thus, the fixed displacement setup ensures predictable motor performance under constant conditions.


What is the difference between a hydrostatic and a hydraulic system?

By "Hydrostatic" systems one tends to mean "closed loop hydraulic systems". That is hydraulic systems comprising a pump and motor hwere the pump supplies the motor whose return side supplies the pump. The speed and direction of rotation of the hydraulic motor being changed according to the displacement angle of the variable displacement axial pison pump. "Open loop hydraulic systems" on the other hand comprises various motors often one or more "linear motors" (hydraulic cylinders). When using hydraulic cylinders in hydraulic systems one needs a reservoir to be able to hold the various volume need of the cylinder. (the displacement on the piston side is usually bigger than the rodside). The reservoir needs a "breather" due to the varous displacement needs hence the "open system".


What does the cubic inch displacement mean on a hydraulic motor?

It means how much oil is needed to make the motor turn one full revolution. If you have a 32 Cubic Inch Hydraulic Motor, you would need to push 32 cubic inches of oil through that motor to turn it once. Using the same hydraulic pump, a smaller cubic inch motor would cause higher speed, but less torque.


What happens when you change the angle of a swash plate?

Changing the angle of a swash plate in a hydraulic piston pump or motor controls the displacement by altering the volume of fluid being moved. This, in turn, changes the speed and direction of the hydraulic system. Adjusting the angle allows for variable flow rates and pressure within the hydraulic system.


What size hydraulic motor is needed to be equal to a 16 hp gas engine?

there is no such thing as a hydraulic motor........there is, however, a hydraulic pump. there is such thing as a hydraulic motor. the hydraulic pump will pump oil to the motor and a pressure differential across the motor causes the fluid power to be converted to mechanical power. the power output of the motor is determined by the motor's pressure, flow, displacement, and torque. ________________________________________________________________ I believe the above post is wrong in part and right in part. Choosing a hydraulic motor to replace you 16hp gas engine requires more information than just the horsepower. It would be helpful to know many other factors, such as required torque needed in the application and the rpm. When these play a part in overall horsepower, knowing these pieces of information will help find a motor. When I've purchased motors in the past, I've used this website. They are very thorough and well-priced. www.surpluscenter.com What I took away from the response above, is the person was trying to tell you how to replace a whole hydraulic system. However, its needed in your case, so long as you have a new power source for the hydraulic motor. (IE: a gas engine to power a hydraulic pump, then lines from the hydraulic pump to the hydraulic motor (insert a valve if you wish to control motor speed and/or direction), and then the hydraulic motor. Its important to have a hydraulic tank with enough capacity to hold all the fluid which will be in motion. The more devices in the system, the bigger the tank. Hope this helps!!


Does the number of batteries affect the speed of a motor?

The number of batteries can affect the speed of a motor. Increasing the number of batteries can provide more power to the motor, potentially increasing its speed. However, there may be limitations based on the motor's design and the capacity of the batteries.


Does a door closer have hydraulic pump in it?

No it does not have a hydraulic pump, oil is forced through an adjustable aperture, it is the rate at which the oil flows through this hole that has a direct affect on the doors closing speed.


How does Hydrostatic Drive work?

Hydrostatic drive operates by using hydraulic fluid to transmit power from a prime mover, like an engine, to a hydraulic motor. The system consists of a hydraulic pump that converts mechanical energy into hydraulic energy, which then flows through hydraulic lines to a motor that converts it back into mechanical energy to drive machinery. This method allows for smooth speed control and high torque at low speeds, making it suitable for applications like construction equipment and vehicles. Additionally, hydrostatic drives are efficient and can provide variable speed without the need for traditional gear systems.


What The Formula Of Displacement?

Displacement is the shortest distance travelled . formula of Displacement= speed * time in meters


What the factor affect the speed of DC motor?

he factors affecting the speed of a d.c. motor are, 1. The flux Φ 2. The voltage across the armature 3. The applied voltage V


Does the amplitude affect on the wavelength or wave speed?

No, the amplitude of a wave does not affect the wavelength or wave speed. The wavelength is determined by the frequency of the wave, while the wave speed is determined by the medium through which the wave is traveling. Amplitude simply represents the maximum displacement of particles in the wave.


What is Hydraulic 5 speed Manuel transmission?

It is a 5 speed manual transmission that is operated/shifted by means of a hydraulic operated clutch.