0
There are essentially two ways to get surround sound out of the Xbox. Via HDMI or via optical (TOSLINK) out. If you have the component video cable, then the end that attaches to the Xbox has an optical out port. Simply attach this to the optical in on your home theatre receiver with an optical cable.
If you want to use audio via HDMI, in order to get surround sound you'll have to have an HDMI receiver capable of receiving audio. In this case run the Xbox via HDMI to the receiver and then the receiver via HDMI to the TV. The HDMI will send both audio and video.
If you have the official Xbox HDMI cable you can also connect the HDMI cable directly to the TV and use the optical out connector that it comes with instead.
What else can I help you with?
If you have direct tv and a cable box a DVD a vcr with surround sound and you would like each one to be able to go through the surround sound how should you hook them all up?
I don't understand why you would have Direct TV (sattelite) and cable TV? However, it depends on the input/output combinations of each component. I have my coaxial cable from my sattelite to the sattelite in jack on the sattelite receiver, the out to TV coaxial from the sattelite receiver run to my VCR plugged to antenna in on the VCR and a coaxial cable from the VCR to the TV coaxial antenna in on the TV. That way, you can watch sattelite without turning the VCR on, but the sattelite receiver has to be off to watch VCR or VHS tapes. Then, run video patch cords (red, white and yellow) out of the DVD to the TV (if the TV has those types of inputs on the back) If you want all three components (sattelite, VCR and DVD) to run through surround sound and NOT the TV, run only the yellow video cord from the DVD to the TV. Run the red and white to the surround sound receiver for each component. Your surround receiver should have multiple inputs for sattelite/cable, VCR and DVD.
When did television sets get sound?
Commercially sold television receivers have always included a circuit for sound. Historically, the first successful transmission of synchronized sound and video took place on 13 June, 1925 when Charles Francis Jenkins sent a 48 line mechanical system image of film and sound five miles in a test transmission.
How do you hook up a Nintendo 64 to a new TV?
You will need an RCA to HDMI converter to connect the Nintendo 64 to a new TV, as most modern TVs do not have the older RCA inputs. Simply connect the yellow, red, and white cables from the Nintendo 64 to the converter, and then connect the HDMI output from the converter to the HDMI input on your TV.
Can you connect logitech x-540 to a TV?
Yes, you can connect the Logitech X-540 speakers to a TV using an RCA audio output or a headphone jack on the TV. Use an RCA-to-3.5mm adapter or cable to connect the TV to the 3.5mm input on the X-540 control pod for audio output.
What is the definition of sound device?
Sound devices are devices for analog and digital audio products for radio, television, film, and music recording.
How do you connect a surround sound to a PS3?
Connect your PS3 to your TV then connect you surround sound to your TV.
How do you connect directv and VCR and surround sound together to tv?
To connect your DirecTV receiver, VCR, and surround sound to your TV, start by connecting the DirecTV receiver to the VCR using an RCA cable (red, white, yellow) or coaxial cable. Then, connect the VCR to the surround sound system, typically using RCA cables for audio output. Finally, connect the surround sound system to the TV, either via HDMI, optical, or RCA cables, ensuring that the correct input source is selected on the TV and surround sound system for proper audio and video playback.
Do you hook the surround sound to the TV or satellite?
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
How do you hook your surround sound up to your 50 inch flat screen?
Connect the digital audio output from the TV to the digital input of the surround sound receiver.
I have a apex tv i want surround system what kind of cables do i need?
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
How do you hookup surround sound with a bass box?
Connect the sound system to the AUDIO OUTPUT connectors on the back of your TV. If theses connectors are not there you will need to get a new TV with these connectors or if there is a cable or Satt. box, connect the surround to these.
How do you hook up netgear neotv streaming player to a surround sound?
If your surround receiver has HDMI, connect an HDMI cable from the NeoTV to the receiver, and then HDMI out the receiver to the TV. If you don't have HDMI on your receiver, you can connect an optical cable from the NEOTV to the surround receiver.
How can I hook up surround sound to my home entertainment system?
To hook up surround sound to your home entertainment system, you will need a receiver that supports surround sound, speakers, and speaker wires. Connect the speakers to the receiver using the appropriate wires, and then connect the receiver to your TV or media player using HDMI or optical cables. Adjust the settings on your receiver to enable surround sound, and enjoy immersive audio experience.
Can you hook up surround sound to Sanyo dp50740?
Yes, you can hook up a surround sound system to a Sanyo DP50740 television. The TV has audio output options such as optical and RCA (red and white audio outputs), which you can use to connect to an external surround sound receiver or sound system. Ensure that your surround sound system has compatible inputs for these outputs. Once connected, you may need to adjust the audio settings on the TV to output sound through the external system.
How do you get sound from your ls 42pg20 tv to a a rca rtb10223 surround sound?
The TV set needs to have audio output connectors. If it has them connect the TV's outputs to RCA's inputs.
How do you hook up a ps3 to surround sound?
You can connect a sound system through your TV or the Sonystyle.com site has a new PS3 sound system for under $200 that was designed for the PS3
How can you connect the surround sound port of led TV to a 5.1 home theatre system?
If your TV has a digital audio output, connect it to the optical or coaxial digital input of the surround receiver. This will pass through the digital audio signal sent from a HDMI input at the TV.
