Any two legs of the 480V will give you 240 V Single phase.
I apologize for the wrong information here. A friendly member reminded me of the correct answer.
I stand corrected. Any two legs would be at 480 single phase. One leg to neutral will give you 277volts not 240 (408/1.73). You would need to install a step down transformer on the 277v line to achieve 240v.
Yes, if the motor is rated 240 volts 3 phase.There is such a thing as 240 volt 3 phase power.However if you are asking if you can use 240 volts single phase on a three phase motor, then the answer is no.
If you mean a dual voltage motor 120/240 then yes these will operate on a 240 volt home distribution system.
No, a 2 pole breaker is designed for a 240-volt circuit or for two separate 120-volt circuits that are out of phase with each other. For a 120-volt single-phase circuit, you would typically use a single-pole breaker.
No, it won't get enough power and won't work.
Modifying a 240 volt appliance to run on 12 volts is not recommended due to significant differences in voltage requirements and power consumption. The appliance would likely require a complete overhaul of its internal components, which can be complex and potentially unsafe. It is safer and more efficient to use a power inverter to convert 12 volts to 240 volts for the appliance.
No. The 1-phase 240 setting on your computer's power supply is for the 240V wall outlets in other countries. The 240 outlets in your home are 2-phase 240.
Yes, if the motor is rated 240 volts 3 phase.There is such a thing as 240 volt 3 phase power.However if you are asking if you can use 240 volts single phase on a three phase motor, then the answer is no.
To convert a 240 volt power source to a 120 volt power source using a 240 volt to 120 volt adapter, simply plug the adapter into the 240 volt outlet and then plug your 120 volt device into the adapter. The adapter will step down the voltage from 240 volts to 120 volts, allowing you to safely power your device. Make sure the adapter is rated for the appropriate wattage to avoid damaging your device.
All my experience with rotary phase converters have been in converting 240 volt single phase into 240 volt three phase. They all were hard wired into their respective systems, so my answer is no.
Yes
Question is incorrect. in a 240 Volt single phase circuit, how can you have A phase and B phase?
no
A single phase 600 to 240 Volt transformer using two phases of the three phase primary.
No. You need a 3-phase supply that matches the voltage and current rating of your appliance.
Yes 220 & 240 are considered the same.
No...that's too much voltage, and 277v is normally three-phase power.
only way to convert from 3 phase to 240 would be to change the electric motor on the compressor