Liters is a measure of volume and kg is a measure of mass. To convert one to the other, you need to know the density (g/ml or kg/L) of the substance.
0.023 kg = 23 gTo convert from kg to g, multiply by 1000.
Density = mass / volume : Mass = volume * density : Volume = mass / densityDensity mild steel = 7.85 kg / litreSo >Mass = volume * density5 litres @ 7.85 kg per litre = 39.25 kilogramsAnd >Volume = mass / density5 kilograms / 7.85 = 0.637 litres
Litres is a measure of volume Stone is a measure of weight You can not convert between the two units without knowing the density of the substance being measured.
23.31 lbs (approx.). Kilogram (kg) is SI unit of mass and Pound is an Imperial unit. To convert from kg to pound multiply kg unit by 2.20462. To convert from pound to kg multiply pound unit by 0.453592.
1 lb = 0.453592 kg → to convert lb to kg multiply by 0.453592 → 180 lb = 180 × 0.453592 kg ≈ 81.64 kg ----------------------------------------------------------- 1/0.453592 ≈ 2.20462 which means that 1 kg ≈ 2.2 lb → to (approximately) convert kg to lb divide by 0.454 or multiply by 2.2
To convert litres to kilograms, you need to know the density of the substance in question. The conversion factor varies depending on the substance. For water, which has a density of 1 kg/l, 18 litres would be equivalent to 18 kg. However, for other substances, the conversion factor would be different.
Kg are units of mass (or weight) Litres are units of volume. There is no direct conversion because different substances will have different densities. You can only convert Kg to Litres when you know the density. The formula is: Divide the mass by the density. eg Water has a density of 1 so the volume of 2 kg of water = 2/1 = 2 litres eg Mercury has a density of 13.6 so the volume of 2kg mercury = 2/13.6 = 0.147 litres
unit weight of cement, Portland is 1506 kg/cu.m unit weight of cement, mortar is 2162 kg/cu.m cement, slurry is 1442 kg/cu.m
Indeterminate value! You can't convert from kg to m³ since kg measures mass while m³ measures volume. These units are thus incompatible to each other.
Multiply the number of litres by 1 million.
To convert 20000 kg of Jet A1 fuel with a specific gravity of 0.86 to liters, you would use the formula: Volume (liters) = Mass (kg) / Specific Gravity. Therefore, Volume = 20000 kg / 0.86 = approximately 23255 liters.
500 litres.
1.75 tonnes 1,750 kg of ballast is one cubic metre, if its concrete then you'd need to add 300kg of cement to mix this to the right ratio for a foundation.
multiply by 1000 as there are 1000 litres in a m3
3 liters of water or any other substance with the same density of water.
750mg convert kg
4 bags of 50 kg each= 200 kg of cement.