i think you should drill through the wall slowly The question was about drilling an hole in a mirror. I think the correct way to do this is to mark out where the hole is required, get some putty and form a cupped mound below, fill with varsol or white spirit, and drill the hole slowly with a special glass drill bit. You must keep the bit lubricated with the liquid to dissipate heat and prevent the mirror from cracking.
Twice as large
Possibly but not likely. If it has an internal fuse it can be fixed. If not then it is more than likely ruined.
A fixture WIP (work in progress) refers to a piece of equipment, tool, or accessory that is being worked on or developed for a specific purpose within a manufacturing or production process. It is often used to hold or support a workpiece in a fixed position to enable efficient and consistent processing.
Nitrogen can be fixed in ecosystems through biological processes, like by nitrogen-fixing bacteria that convert atmospheric nitrogen into a usable form for plants. It can also be fixed through human activities, such as the use of nitrogen fertilizers in agriculture.
No. Most light fixtures are designed to be mounted on electrical boxes which are fixed to the building frame work. Mounting the fixture without a box leaves the connection open on one side to a combustible surface. If a problem arises with the connection and heat is generated a fire could start. A surface mounted fluorescent is allowed to be mounted without a box. This is because the connection to the ballast is made inside the metal enclosure of the fixture.
Twice as large
Often, a spring loaded mechanism on a LH side view mirror cannot be fixed. The mirror will need to be replaced instead of being fixed.
Under Ledger : Furnitures & Fixture under : Fixed Asset
A baton, or other fixture is first fixed to the outdoor wall, usually with masonry nails of screws. The light fixture itself is then attached to this baton.
Yes you can, but most police officers will give you a warning to get it fixed (some will ask you prove you did have it fixed) and you should get it fixed!
Yes, water leaking from a light fixture can be fixed by first turning off the electricity to the fixture, then identifying and repairing the source of the leak, such as a damaged seal or pipe. It is important to address the issue promptly to prevent electrical hazards and further damage.
No a VSR is not a hammer drill. VSR means Variable Speed Reversing. This is because in the old days most electric hand drills ran at a fixed speed and often could not reverse. -A hammer drill has a much more complex transmission than a standard drill, and is much more expensive.
You can get a fixed line of credit through your bank and also through a consultant. You can get a fixed rate through a home equity loan. Or through a credit repair company.
No, the focal length of a mirror does not change when the object distance changes. The focal length of a mirror is a fixed property of the mirror itself. Changing the object distance will affect the position and size of the image formed by the mirror, but not the focal length.
I expect that you can buy the mirror online but I had mine fixed at a local glass shop. They purchased or cut a mirror to fit and they glued it over the cracked one.
Possibly but not likely. If it has an internal fuse it can be fixed. If not then it is more than likely ruined.
It is a moving violation in CA to drive with a broken passenger side-view mirror. It is important to get it fixed ASAP.