answersLogoWhite

0

I would first pour several buckets of water down the drain without running the tub faucet to see if the drain is leaking. Then I would with a spray bottle direct water around the drain lever/overflow plate, tub spout and valve to see if that is where the leak is. I would then move to the valve itself to see if that is leaking checking packings and the diverter. If nothing shows at that point check tub tiling and possible water spilling on the floor. If water is appearing and you cannot determine where it is coming from you may have to open a wall or ceiling to determine. I also try measuring where the leak is and comparing the measurements to locations of tub parts. In any case I try my best to find the cause before cutting walls and ceilings unless the ceiling is already shot from the leak then open it up and look. Wall openings are done on the wall behind the tub valve usually a closet or bedroom wall, never break out the tub wall around the valve.

User Avatar

Wiki User

19y ago

What else can I help you with?

Continue Learning about Natural Sciences

What is the volume of water in a half filled bath?

To determine the volume of water in a half-filled bath, you need to know the total capacity of the bathtub. For example, if a bathtub has a capacity of 150 liters, then half-filled would contain 75 liters of water. Simply divide the total volume by two to find the volume of water when the bath is half full.


How many cups of water can fulfill a bathtub?

It depends how big it is and how deep you fill it.A:Get a bucket that you know the size of (normal buckets hold up to 4.5 gallons (18 liters)). Next time you fill the bath, fill it bucket by bucket. Then you will know how much water you have used. You can measure the shower in a slightly different way. Count how many seconds it takes to fill the bucket. Then time your normal shower. If it takes 60 seconds to fill a 5 gallon bucket and you take a 4 minute shower, you will use 20 gallons of water for your shower. That's a lot of water!A:According to the BBC Website, a bath can hold 80 litres of water. A:How many gal tub is it!Or what size in inches is it,Length 3-1/2' ?wide 2' ?water depth 1' ?If so then some where < then 50 US galA:Apparently, when comparing a bath to a shower, a bath is much more wasteful. To try it out, plug the drain and run the bathwater for 10 minutes (enjoy the bath). Next time you have a shower plug the tub and see how much is in the bottom after 10 minutes. A:The dimensions of a standard size bathtub are approximately: two feet wide, four and one-half feet long, and one foot deep. Simply multiply as follows to find the tub's volume in cubic feet: 2 x 4.5 x 1 = 9 cubic feet.Now one (1) cubic foot of space will hold 7.48051945 gallons of any liquid, so to find the tub's volume in gallons, one must simply multiply this decimal by its volume in cubic feet.The answer is as follows:9 x 7.48051945 = 67.3 (rounded to the nearest tenth)Therefore, a bathtub with the dimensions described above will hold about sixty-seven gallons of water when completely full.A:35 to 40 gallons for typical tub A:The average bathtub will hold 40 to 60 gallons when completely filled. A:Depends on how big the bathtub is but average bathtub size is about 80 liters A:Typically data on water conservation use a bathtub volume of 25 to 340 gallons for comparison with showers. Larger jetted tubs (whirlpools, jacuzzis, etc.) exist but these would be special cases.


Where is the safest place to hide from a tornado if you dont have a bathtub?

The safest place to hide from a tornado if you don't have a bathtub is in a small, windowless interior room on the lowest level of your home. This could be a closet, hallway, or basement. Make sure to cover yourself with a mattress or heavy blankets to protect from flying debris.


What planet would actually float in water?

Saturn would be the planet that would float in water due to its low density. Saturn is made mostly of hydrogen and helium, which are gases that are less dense than water. If you could find a big enough bathtub, Saturn would float!


Will Saturn float or sink if you place water?

Float. The problem is whether you can find a bathtub big enough for it :D

Related Questions

Where can I find bathtub replacement parts for my damaged bathtub?

You can find bathtub replacement parts at home improvement stores, online retailers, or directly from the manufacturer of your bathtub.


Where can I find a book on bathtub refinishing?

I want to refinish my bathtub but don't know how. Is there a book on bathtub refinishing?


What are some things you find in the bathroom?

In the bathroom you find a toilet, sink, bathtub and soap. You also find toilet paper, plumbing, towels and water.


What should I do if I find a chip in my bathtub?

If you find a chip in your bathtub, you should repair it promptly to prevent further damage and maintain the bathtub's integrity. You can use a bathtub repair kit or consult a professional for assistance.


Where can one find bathtub refinishing ideas?

I would like to refinish my bathtub instead of buying a new one. Where can one find information on bathtub refinishing?


How do you find a leak in my spa?

you find out were the water is coming from after you fill it up with water.


Where is the bowl for the cat on 24 carrot island?

Go left from Main Street to the old farmhouse. You have to enter through the chimney. The bowl is on the floor inside. Once you fill it with milk at the Carrot Diner, bring it back and you will find the cat upstairs in the bathtub.


Where can I find bathtub reglazing tutorials?

The bathroom in my new apartment requires some repair. Where can I find information (or tutorials) on bathtub reglazing?


I am the object in the solar system that can float in water if you find a bathtub big enough to hold me?

You are an asteroid. Asteroids are rocky objects that orbit the sun just like planets, but they are much smaller in size. If you were to find a bathtub large enough, an asteroid would be able to float in water due to its relatively light weight compared to its volume.


What is the volume of water in a half filled bath?

To determine the volume of water in a half-filled bath, you need to know the total capacity of the bathtub. For example, if a bathtub has a capacity of 150 liters, then half-filled would contain 75 liters of water. Simply divide the total volume by two to find the volume of water when the bath is half full.


Where online can I find a guide about how to refinish a bathtub?

You can find a guide on how to refinish a bathtub on the following site: http://homerenovations.about.com/od/bathrooms/a/artrefinishtub.htm. It is a great resource.


What should be the general size of a bathtub?

Bathtub widths definitely vary. You can find tubs with a width of about 30 inches to almost 50 inches in width. These tubs can hold up to 75 gallons of water.