answersLogoWhite

0

The manufacture lists the mileage at which the timing belt must be replaced. On vehicles that have an interference engine if the belt breaks you will have serious internal engine damage. The mileage at which it must be changed varies from 60,000 to 110,000 miles. As you did not list your make, model, year, or engine size I can give you no definitive answer. Look in your owners manual.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Natural Sciences

Does the 1987 22re have a timing belt or timing chain?

The 1987 22RE engine has a timing chain, not a timing belt. Timing chains are generally more durable and are designed to last the life of the engine, whereas timing belts need to be replaced at regular intervals.


How often do you need to change the timing belt in a 94 mercury topaz?

It is recommended to replace the timing belt in a 1994 Mercury Topaz every 60,000-100,000 miles. It is important to follow the manufacturer's guidelines to prevent potential engine damage due to belt failure.


Does a 94 mercury topaz have timing chain or belt?

The 2.3 liter 4 cylinder and the 3.0 liter V6 have a timing CHAIN


Does a 1994 Saturn with a 1.9 liter engine have a timing chain?

Yes, it uses an internal timing "CHAIN", not a belt. The timing chain should last until the engine needs to be rebuilt.


How do you change Peugeot 106 cambelt?

If you are unsure it might be best to find someone who can and get them to teach you. But basicaly you have to disconnect the battery, jack up the car, remove the driver side front wheel. Remove the cover behind the wheel. Bar engine over until you can insert a locking bolt and nutinto the hole of the cam wheel that secures the wheel to the engine to prevent accidental movement. You have to remove the timing belt covers, remove the auxillary belts (probably best to change these to) Remove the auxillary crankshaft wheels to get complete access to the timing belt. Remove timing belt by whatever means. When fitting the new belt check the arrows on the belt are going in the same direction as the old belt. It is fiddly getting the new belt back on, and there is provision to move the tensioner to allow ease of refitting. Although for some reason I prefer to strugle without doing that. I just inch it on slowly until the belt sits central to the width of wheel. Then replace everything you have removed. Be sure to have the correct replacement belts before you change them!! There are variations!.