0
What else can I help you with?
What gas do you test using lime water?
You can test for carbon dioxide gas using lime water. When carbon dioxide is blown into lime water, it turns cloudy due to the formation of calcium carbonate.
What is the role of water in the Benedict reagent?
It acts as a control for the experiment so that you can compare the result (of benedict's test in water) with the other test (using food with sugar)
How do you know there is a gas in the tube without in salt or water?
You can identify the presence of gas in a tube without using salt or water by observing changes in pressure or volume, using a gas detector, or by noting any changes in temperature. If the gas is reactive, you might also be able to detect it through its odor or by using a lit splint to test for flammability. Additionally, if the gas is trapped in the tube, you might see the tube expand or feel vibrations if the gas is under pressure.
How can one lower a crystal in a beaker of water using a test tube?
Put a glass tube into the beaker of water so that it touches the bottom, then drop the crystal down the tube and put your finger over the top of the, then remove the tube gently, leaving the crystal behind in the beaker. After that laugh maniacally at the test tube and you might become an evil genius! Hope this helps! :)
How can brownish water mark staining be removed or diminished from a solid Creme color linen shower curtain without bleaching its original color?
To remove brown water stains from a solid creme linen shower curtain without risking bleaching, you can create a paste using baking soda and water. Gently rub the paste onto the stained areas, then rinse thoroughly with water. You can also try using a mild vinegar solution to remove the stains effectively.
Can you test pH without water?
no
How can I get sprinkler heads to pop up without water?
To get sprinkler heads to pop up without water, you can manually lift them up using your hands or a tool designed for that purpose. This can help you test the functionality of the sprinkler heads without needing water to activate them.
How do you test for sulfur in tap water?
You can test for sulfur in your tap water by using a test kit. It is not unusual to have very small amounts in your water which is not considered harmful.
How do you detect the presence of metanil yellow in arhar dal i?
take about 5g of dal in a test tube .Add 8-10 ml of distilled water and shake well . Separate the filtrate in a test tube. To 1ml of the filtrate,add 2-3 drops of concentrated HCl. we observed a pink or magenta colouration appears which persists after dilution. it confirms the presence of metanil yellow in arahar dal.
What gas do you test using lime water?
You can test for carbon dioxide gas using lime water. When carbon dioxide is blown into lime water, it turns cloudy due to the formation of calcium carbonate.
What does a drug screen urine test with a result of positive filtrate represent?
it ether means you have been hitting the bong pipes and stuff or that test is srewed up!
What is an affordable home water test?
An affordable home water test can be conducted by using a home water test kit. You can buy this kit at any hardware store. It will tell you if your water is safe to use.
How do you analyze drinking water?
ph levels using test strips, and lab test using incubators to determine what pathogens are present.
How do you test how strong toilet paper is?
test to see how much water it can contain without dripping
How can I test a coax cable without using a multimeter?
To test a coax cable without using a multimeter, you can use a cable tester specifically designed for coax cables. These testers can check for continuity and signal strength without the need for a multimeter.
How can you test iron parts in water by filteration mathod?
how can i test iron parts in water by filteration method using sequestering agent
How high is 2 mL of water in a test tube?
It depends on what size test tube you are using.
