Sintered glass crucibles typically use a type of filter paper known as "sintered glass filter discs" or "sintered glass filters." These filters are made from finely powdered glass that is sintered to form a porous structure, allowing for the filtration of fine particles while maintaining chemical resistance. They are commonly used in laboratory applications for filtration, drying, and other processes where durability and purity are essential.
A sinterd funnel is simply a funnel with a built in filter. The filter is sintered, I think that this means that small particles are compressed together (and heated ?) to form a single piece of material with many small holes. The sintered funnels I use are made of glass, a link to some images is below (not mine). http://curlyarrow.blogspot.com/2008/01/how-to-clean-your-sintered-funnel.html I have also used sintered polyethylene and sintered stainless steel for filtering.
The pore size is the average 100 micrometers.
To avoid contamination, especially in chemical analysis.
Sintered NdFeB magnets are made by compacting and heating a mixture of neodymium, iron, and boron powders. This process results in a very strong and high-performance magnet. Bonded NdFeB magnets are made by mixing NdFeB powder with a polymer binder, which allows for complex shapes but with lower magnetic properties compared to sintered magnets.
Sintered glass crucibles typically use a type of filter paper known as "sintered glass filter discs" or "sintered glass filters." These filters are made from finely powdered glass that is sintered to form a porous structure, allowing for the filtration of fine particles while maintaining chemical resistance. They are commonly used in laboratory applications for filtration, drying, and other processes where durability and purity are essential.
A sinterd funnel is simply a funnel with a built in filter. The filter is sintered, I think that this means that small particles are compressed together (and heated ?) to form a single piece of material with many small holes. The sintered funnels I use are made of glass, a link to some images is below (not mine). http://curlyarrow.blogspot.com/2008/01/how-to-clean-your-sintered-funnel.html I have also used sintered polyethylene and sintered stainless steel for filtering.
Sintered glass crucible is a glass mesh used for filteration. It can be used instead of filter paper, and in fact it is preferrable to filter paper. Sintered glass crucible must be cleaned then dried to constant weig befoe it can be used to filter out precipitates such as silver chloride.
Porosity 4 sintered glass typically has pore sizes ranging from 4 to 16 micrometers, with an average pore size of around 8 micrometers. The pore size distribution can vary depending on the specific manufacturing process and conditions used to produce the sintered glass material.
Sintered glass is a glass mesh used for filtration. It can be used instead of filter paper, and in fact is preferable to filter paper. Its other advantage is that it is permanent so you can get various different pieces of glassware with sintered glass in it e.g. an enclosed filter suitable for filtration under nitrogen. As for the porosity.... Porosity of sintered glass is labelled by integers from 0-5 (viz. 0, 1, 2, 3, 4, 5) where 0 has a pore size of 160-250 micrometres and is considered course filtration, that is fluid will pass through it quickly and some finer solids will pass through. Whereas, porosity 5 has a pore size of 4-10 micrometers so even ultrafine solids will not pass through and liquids will drop through. I hope this is clear, makes sense and is helpful.
The pore size is the average 100 micrometers.
To avoid contamination, especially in chemical analysis.
sintered iron or bronze
Formed into a mass by heat and pressure
Sintered NdFeB magnets are made by compacting and heating a mixture of neodymium, iron, and boron powders. This process results in a very strong and high-performance magnet. Bonded NdFeB magnets are made by mixing NdFeB powder with a polymer binder, which allows for complex shapes but with lower magnetic properties compared to sintered magnets.
you use the same glass as you use for winter horticultural, standard, or laminated glass.
Brembo are the original fitment EBC brake pads work just as well and are half the price. Sintered pads are required for the front and the original fitment for the rear is non sintered.