0
Side-lobe blanking in radar is a technique used to suppress unwanted signals from antenna sidelobes. It involves setting a threshold level, below which signals from sidelobes are ignored. The radar system compares the received signals to this threshold, and any signals below it are considered noise and are not processed further. This helps improve the radar's ability to detect and track targets by minimizing interference from undesired signals.
What else can I help you with?
What is the Products of blanking process?
The products of a blanking process are flat pieces of material known as blanks or blanks parts. These blanks are usually used as starting material for subsequent manufacturing processes such as stamping, forming, or machining to create final products. Blanket parts are typically cut to a specific shape and size based on the requirements of the final product.
What radar is a New generation of weather radar that is capable of detecting motion directly?
The new generation of weather radar that is capable of detecting motion directly is called phased array radar. This radar technology allows for faster and more accurate detection of weather phenomena such as tornadoes, hurricanes, and other severe weather events. It provides meteorologists with valuable real-time data to improve weather forecasting and warnings.
Is Doppler radar used for finding hurricanes?
Yes, Doppler Radar can be used to find all storms!
Block diagram mti radar and its working?
In an MTI (Moving Target Indication) radar system, the block diagram consists of a transmit/receive antenna, a duplexer to switch between sending and receiving modes, a radar signal processor to detect moving targets, and a display unit for visualization. The radar sends out a series of pulses and examines the return signal to detect targets with a non-zero Doppler shift, indicating movement. The radar signal processor filters out stationary clutter and focuses on moving targets, displaying their position and velocity on the radar screen.
Meteorologists use a special kind of radar which is based on the?
Meteorologists use a special kind of radar called Doppler radar, which is based on the principle of measuring the shift in frequency of the radar waves that are reflected off precipitation particles. This shift in frequency allows meteorologists to detect the motion of precipitation particles, which is useful for tracking severe weather such as thunderstorms and tornadoes. Doppler radar helps meteorologists to provide accurate and timely weather forecasts and warnings.
Do you carry a device for sending tspi from a radar for point and other radar?
NetAcquire makes systems that do that.
Do Alabama policemen have to have to permit to carry a radar gun?
No. It is not a weapon.
What is the difference between piercing and blanking?
Piercing is a real service, Blanking is something someone made up
What is considered blanking on WikiAnswers?
Blanking is the act of a user deleting a good answer, and replacing it with false/useless information.
What has the author William F Gabriel written?
William F Gabriel has written: 'Constrained beamspace sidelobe canceller (SLC) with a tapped delay line in each beam' -- subject(s): Antenna arrays 'A high-resolution target-tracking concept using spectral estimation techniques' -- subject(s): Tracking radar
How do i get my 2 best friends to stop blanking me?
try talking to them about it. ask them why they're blanking you and if they do have a problem then try to solve it or come to an agreement which suits all of you. if they are just blanking you without reason then they don't deserve to be your friends.
How can you generate blanking and raster ramp signal using fpga?
Blanking Means it's a Zero signal. But that zero signal is operate some V volts.
What is the difference between blanking and punching?
Blanking and punching are both shearing operation. The difference is only in the scrap. In blanking what you cut out is of interest.In punching what you cut from is of interest.For example: You cut a hole in a sheet metal. If you are interested in the disc that is cut out, then the process is called blanking. The sheet metal with a hole through it is the scrap. If you are interested in the sheet metal that now has a hole through it, then the process is called punching. The disc is the scrap.
Full form of IFB?
Indian fine blanking
How do you calculate blanking force?
Blanking force can be calculated using the formula: Blanking force = (Tensile strength of the material) x (Cross-sectional area of material being blanked) x (Factor of safety) Ensure to use the correct units for each parameter in the formula for accurate results.
How long does a person when blanking answers get banned?
This is totally dependent upon the Supervisor's personal discretion. Usually, a Supervisor would ban someone for blanking answers between 3 and 7 days. However, it depends on the severity of the action. The Supervisor may suspend you longer depending on the severity of your blanking activity.
Equalizing pulses in TV are sent during?
vertical blanking.
