A voltmeter works by adding a parallel branch with high impedence across two points. Based on the amount of current (measured by electronic components within the meter) that flows through the parallel branch, and the known resistance of that branch, the voltage can be calculated via Ohm's Law.
The idea is to have the impedance be very high compared to the two points, so that the amount of current running through the meter will be very small compared to the current between the two points.
A
A volt meter
Electric flux.
It should work okay.
Yes. On the Scale, 20.00 would be 20 Volts and 01.28 would be 1.28 Volts.Therefore, 0.96 would equal 0.96 V or 960 mV
Check the batteries in the remote with a volt meter.
The volt.
It depends on what you want to monitor. Most commonly the volt meter is connected in parallel with the battery or the alternator.
Volts
Parallel
Purchase, borrow, or have someone with a volt meter or multimeter check it for you. If you don't know what a volt meter or multi meter is, have an electrician check it for you.
Something won't work. One can test any fuse with a VOM (volt-ohm-meter) or DMM (digital multi-meter)
There is no volt meter or amp meter in a DC watt meter.
Yes
Yes it would work pretty well but it might not meet its accuracy specification.
as a tester
Volt-Ohm Meter