Electricity is measured with a volt-ohm-amp meter.
You will need a test instrument known as a clamp on amp meter. The test instrument clamps around one of the A/C units feed conductors. From the meter face you will read what the actual current is flowing through the feeder conductor.
Sure
A 'volt ampere' (not 'volt amp'!) is the unit for theapparent power of a load in an a.c. circuit. It is simply the product of the supply voltage and the load current.
The neutral wire does carry current in a closed AC circuit. Clamp a clamp on amp meter around the neutral wire directly after the circuit load and it will read the same current as is on the "hot" wire.
Continuity tester, volt meter, clamp on amp meter, megger and ohm meter.
You can measure the electrical current with an amp meter. Amperage measures the current flow.
For AC circuits, amperage is checked with a clamp on amp meter. There is now in the market place a clamp on amp meter that will work on both AC and DC circuits.
There is no volt meter or amp meter in a DC watt meter.
Most volt/amp meters have a DC mode. You measure DC voltage by putting the two probes across the voltage source. You measure current by either putting the meter in series with the load or using a clamp on amp meter that measures current flow through induction.
test light or volt meter
No but you can use a volt meter to read voltage.
Clamp the meter around the energized conductor that is connected to the load to be measured and read the amperage off of the dial face of the meter.
you dont you need an ammeter for that
Electricity is measured with a volt-ohm-amp meter.
Yes but the meter has to go in series with the load. There is a new clamp on amp meter being introduced, that will measure larger DC amperages without opening the circuit.
You will need a test instrument known as a clamp on amp meter. The test instrument clamps around one of the A/C units feed conductors. From the meter face you will read what the actual current is flowing through the feeder conductor.