It depends on the bulb
Technically speaking a bulb and a lamp are the same thing. You can use a 60 watt bulb in a fixture calling for a 40 watt bulb but I wouldn't. The lighting fixture may get to hot, melt and start a fire.
For young chicks, a 40-60 watt bulb is recommended for providing heat in their brooder. Make sure to monitor the temperature in the brooder and adjust the height of the bulb accordingly to ensure that the chicks are warm but not too hot.
This depends on the bulb design. A simple tungsten filament bulb might have a surface temperature of the bulb well above 100 C. A fluorescent lamp will be much cooler for the same light output.
Depends on the wattage of the bulb. It will definitely get hot enough to burn your hand. <<>> Like an electric heater the higher the wattage rating the hotter the unit becomes. A ten watt lamp can be turned out by hand when it is operating, a hundred watt lamp you can not hold onto it long enough to even start turning the lamp out of its socket.
If you turn a 60 watt light bulb on and off, it will still consume 60 watts when it is turned on. The act of turning it off does not reduce its power consumption when it is on. However, when the light bulb is turned off, it consumes no power.
There are many causes for this, the first and most common is that their light is too hot. Never use anything higher than a 75 watt bulb. One way to be sure of this is checking to see where your beardie is when he is not basking. If it is in shady areas this most likely means that the light is too hot.
120
A 60 watt bulb can reach temperatures of around 200-250 degrees Fahrenheit when turned on.
Technically speaking a bulb and a lamp are the same thing. You can use a 60 watt bulb in a fixture calling for a 40 watt bulb but I wouldn't. The lighting fixture may get to hot, melt and start a fire.
When measured with an infrared thermometer it read 169.9 degrees F.
A 60 watt bulb may be too hot for a glass chicken egg incubator and could potentially overheat the eggs. It is recommended to use a lower wattage bulb or a specific heat source designed for egg incubation to maintain a consistent temperature.
The electric power measured in watts is used to heat a filament in the light bulb (which glows because it is very hot). More energy gives more heat. It's very simple.
The resistance of a light bulb varies, depending on the type of bulb, the power rating, and the temperature. A typical incandescent 60 watt bulb, for instance has a cold resistance of about 30 ohms, and a hot resistance of about 240 ohms.
A typical 80-watt incandescent light bulb can reach temperatures up to around 200 degrees Fahrenheit (93 degrees Celsius) during operation. LED and CFL bulbs operate at lower temperatures.
For young chicks, a 40-60 watt bulb is recommended for providing heat in their brooder. Make sure to monitor the temperature in the brooder and adjust the height of the bulb accordingly to ensure that the chicks are warm but not too hot.
A 300 watt light bulb can reach temperatures around 350-500 degrees Fahrenheit when operating. This heat is generated as a byproduct of converting electrical energy into light and can pose a fire hazard if the bulb comes into contact with flammable materials. It is important to follow safety guidelines and avoid touching the bulb when it is in use.
This depends on the bulb design. A simple tungsten filament bulb might have a surface temperature of the bulb well above 100 C. A fluorescent lamp will be much cooler for the same light output.