0
What else can I help you with?
Can kinetic energy be changed back to potential energy?
Kinetic and Potential EnergyHistoryA roller coaster train going down hill represents merely a complex case as a body is descending an inclined plane. Newton's first two laws relate force and acceleration, which are key concepts in roller coaster physics. At amusement parks, Newton's laws can be applied to every ride. These rides range from 'The Swings' to The 'Hammer'. Newton was also one of the developers of calculus which is essential to analyzing falling bodies constrained on more complex paths than inclined planes. A roller coaster rider is in an gravitational field except with the Principle of Equivalence.Potential EnergyPotential energy is the same as stored energy. The "stored" energy is held within the gravitational field. When you lift a heavy object you exert energy which later will become kinetic energy when the object is dropped. A lift motor from a roller coaster exerts potential energy when lifting the train to the top of the hill. The higher the train is lifted by the motor the more potential energy is produced; thus, forming a greater amount if kinetic energy when the train is dropped. At the top of the hills the train has a huge amount of potential energy, but it has very little kinetic energy.Kinetic EnergyThe word "kinetic" is derived from the Greek word meaning to move, and the word "energy" is the ability to move. Thus, "kinetic energy" is the energy of motion --it's ability to do work. The faster the body moves the more kinetic energy is produced. The greater the mass and speed of an object the more kinetic energy there will be. As the train accelerates down the hill the potential energy is converted into kinetic energy. There is very little potential energy at the bottom of the hill, but there is a great amount of kinetic energy.TheoryWhen the train is at the top and bottom of the hill there is not any potential or kinetic energy being used at all. The train at the bottom of the first drop should have enough energy to get back up the height of the lift hill. The "Act of Faith" in riding these amazing rides which seems more of a phenomena that is only a theory. In practices, the train never could make it back up the hill because of dissipative forces. Friction and air resistance, and even possible mid-course breaks, are dissipative forces causing the theory to be changed but not destroyed. These forces make it impossible for the train to have enough energy to make it back up the lift hill's height. In the absence of the dissipative forces the potential and kinetic energies(mechanical energy) will remain the same. Since the mechanical energy is destroyed by the forces, the first hill is always the highest
What is potential energy and kinetic energy?
In a system the potential energy is related to forces acting between bodies inside the system. Kinetic energy of a moving body is defined as K=(1/2)*m*v^2 where m is the mass of the body and v its velocity. If no energy is transfered to or from the system then the sum of the system's kinetic and potential energy remains constant.answer2: The universe is composed or quaternions, a real number or scalar and 3 vector numbers. Energy has these two types the potential energy is the real part and kinetic energy is the vector part, for example take gravity energy:E = Pot + Kin = -mGm/r + mcV = -mu/r + mcV ,where the potential gravitational energy is the scalar part and mcV is the kinetic vector energy. V is the velocity vector.Currently Physics defines "energy as a scalar" in spite of Torque, a vector FxR with units joule or Newton -meter.Well, kinetic energy is the energy of motion and potential energy is the energy of positionPotential Energy. Stored energy that results from the position or shape of an object.Kinetic Energy Energy that an object has due to its motion.HistoryA roller coaster train going downhill represents merely a complex case as a body is descending an inclined plane. Newton's first two laws relate force and acceleration, which are key concepts in roller coaster physics. At amusement parks, Newton's laws can be applied to every ride. These rides range from 'The Swings' to The 'Hammer'. Newton was also one of the developers of calculus which is essential to analyzing falling bodies constrained on more complex paths than inclined planes. A roller coaster rider is in an gravitational field except with the Principle of Equivalence.Potential EnergyPotential energy is the same as stored energy. The "stored" energy is held within the gravitational field. When you lift a heavy object you exert energy which later will become kinetic energy when the object is dropped. A lift motor from a roller coaster exerts potential energy when lifting the train to the top of the hill. The higher the train is lifted by the motor the more potential energy is produced; thus, forming a greater amount if kinetic energy when the train is dropped. At the top of the hills the train has a huge amount of potential energy, but it has very little kinetic energy.Kinetic EnergyThe word "kinetic" is derived from the Greek word meaning to move, and the word "energy" is the ability to move. Thus, "kinetic energy" is the energy of motion --it's ability to do work. The faster the body moves the more kinetic energy is produced. The greater the mass and speed of an object the more kinetic energy there will be. As the train accelerates down the hill the potential energy is converted into kinetic energy. There is very little potential energy at the bottom of the hill, but there is a great amount of kinetic energy.TheoryWhen the train is at the top and bottom of the hill there is not any potential or kinetic energy being used at all. The train at the bottom of the first drop should have enough energy to get back up the height of the lift hill. The "Act of Faith" in riding these amazing rides which seems more of a phenomena that is only a theory. In practices, the train never could make it back up the hill because of dissipative forces. Friction and air resistance, and even possible mid-course breaks, are dissipative forces causing the theory to be changed but not destroyed. These forces make it impossible for the train to have enough energy to make it back up the lift hill's height. In the absence of the dissipative forces the potential and kinetic energies(mechanical energy) will remain the same. Since the mechanical energy is destroyed by the forces, the first hill is always the highest.KINETIC POTENTIAL ENERGY,iS the ammount of energy one has, then the other is stopped and it goes down a hill or something steep.
How is riding a bike kinetic energy?
The motorcycle's gasoline is potential energy. The energy is released as a chemical reaction (chemical energy) and converted to heat (heat energy). It then becomes converted to kinetic energy with the movement in the engine, and subsequent movement of the motorcycle.
How do roller coasters affect your body?
Roller coasters can physically impact your body by subjecting it to sudden changes in motion, acceleration, and direction. This can trigger sensations of weightlessness, G-forces, and adrenaline release, which may cause effects like increased heart rate, elevated blood pressure, and temporary disorientation. Some people may also experience symptoms like nausea, dizziness, or headaches due to the intense movements.
When was The Cyclone Rider created?
The Cyclone Rider was created on 1924-09-14.
When do riders free-fall on a roller coaster?
Well in roller coasters there is potential and kinetic energy. So when the roller coaster is getting pulled up it is using kinetic energy while gaining potential energy. So the potential energy it gained is used while going down and not being pulled.
How many corkscrews are in Ghost Rider roller coaster?
none
What was the first roller coaster made of and was it very effecient?
the first roller coaster was at connie island but it was a one loop ride. It often caused a harsh whiplash to the rider.
What Kind Of roller coaster Is The Swarm?
A Bolliger & Mabillard Wing Rider coaster, which was first introduced with Raptor at Gardaland in 2011.
What types of motion does the rider experience during the roller coaster ride?
it's periodic motion.
What store of energy does a bicycle carry?
A bicycle carries kinetic energy when it is in motion. The kinetic energy comes from the rider's pedaling efforts and is stored in the motion of the bicycle and rider.
What is the input of the wheel on a bicycle?
The human rider turning chemical energy into kinetic energy and possibly into kinetic energy.
Can roller coaster shorten your lifespan?
No, roller coasters are generally safe, assuming that the rider is in good health prior to riding. According to the IAAPA (International Association of Amusement Parks and Attractions), most deaths that occur as the assumed 'result' of roller coaster rides are generally due to a preexisting condition that the rider had. Be sure to heed all safety information posted prior to riding.
Kinetic energy transformed into potential energy?
Kinetic and Potential EnergyHistoryA roller coaster train going down hill represents merely a complex case as a body is descending an inclined plane. Newton's first two laws relate force and acceleration, which are key concepts in roller coaster physics. At amusement parks, Newton's laws can be applied to every ride. These rides range from 'The Swings' to The 'Hammer'. Newton was also one of the developers of calculus which is essential to analyzing falling bodies constrained on more complex paths than inclined planes. A roller coaster rider is in an gravitational field except with the Principle of Equivalence.Potential EnergyPotential energy is the same as stored energy. The "stored" energy is held within the gravitational field. When you lift a heavy object you exert energy which later will become kinetic energy when the object is dropped. A lift motor from a roller coaster exerts potential energy when lifting the train to the top of the hill. The higher the train is lifted by the motor the more potential energy is produced; thus, forming a greater amount if kinetic energy when the train is dropped. At the top of the hills the train has a huge amount of potential energy, but it has very little kinetic energy.Kinetic EnergyThe word "kinetic" is derived from the Greek word meaning to move, and the word "energy" is the ability to move. Thus, "kinetic energy" is the energy of motion --it's ability to do work. The faster the body moves the more kinetic energy is produced. The greater the mass and speed of an object the more kinetic energy there will be. As the train accelerates down the hill the potential energy is converted into kinetic energy. There is very little potential energy at the bottom of the hill, but there is a great amount of kinetic energy.TheoryWhen the train is at the top and bottom of the hill there is not any potential or kinetic energy being used at all. The train at the bottom of the first drop should have enough energy to get back up the height of the lift hill. The "Act of Faith" in riding these amazing rides which seems more of a phenomena that is only a theory. In practices, the train never could make it back up the hill because of dissipative forces. Friction and air resistance, and even possible mid-course breaks, are dissipative forces causing the theory to be changed but not destroyed. These forces make it impossible for the train to have enough energy to make it back up the lift hill's height. In the absence of the dissipative forces the potential and kinetic energies(mechanical energy) will remain the same. Since the mechanical energy is destroyed by the forces, the first hill is always the highest
Are flying roller coaster possible?
No. Roller coasters run on gravity and G force. The nearest type is the one who puts the rider on the track with the chair below the track and their feet dangle in the air.
How do you transfer potential energy into kinetic energy?
Kinetic and Potential EnergyHistoryA roller coaster train going down hill represents merely a complex case as a body is descending an inclined plane. Newton's first two laws relate force and acceleration, which are key concepts in roller coaster physics. At amusement parks, Newton's laws can be applied to every ride. These rides range from 'The Swings' to The 'Hammer'. Newton was also one of the developers of calculus which is essential to analyzing falling bodies constrained on more complex paths than inclined planes. A roller coaster rider is in an gravitational field except with the Principle of Equivalence.Potential EnergyPotential energy is the same as stored energy. The "stored" energy is held within the gravitational field. When you lift a heavy object you exert energy which later will become kinetic energy when the object is dropped. A lift motor from a roller coaster exerts potential energy when lifting the train to the top of the hill. The higher the train is lifted by the motor the more potential energy is produced; thus, forming a greater amount if kinetic energy when the train is dropped. At the top of the hills the train has a huge amount of potential energy, but it has very little kinetic energy.Kinetic EnergyThe word "kinetic" is derived from the Greek word meaning to move, and the word "energy" is the ability to move. Thus, "kinetic energy" is the energy of motion --it's ability to do work. The faster the body moves the more kinetic energy is produced. The greater the mass and speed of an object the more kinetic energy there will be. As the train accelerates down the hill the potential energy is converted into kinetic energy. There is very little potential energy at the bottom of the hill, but there is a great amount of kinetic energy.TheoryWhen the train is at the top and bottom of the hill there is not any potential or kinetic energy being used at all. The train at the bottom of the first drop should have enough energy to get back up the height of the lift hill. The "Act of Faith" in riding these amazing rides which seems more of a phenomena that is only a theory. In practices, the train never could make it back up the hill because of dissipative forces. Friction and air resistance, and even possible mid-course breaks, are dissipative forces causing the theory to be changed but not destroyed. These forces make it impossible for the train to have enough energy to make it back up the lift hill's height. In the absence of the dissipative forces the potential and kinetic energies(mechanical energy) will remain the same. Since the mechanical energy is destroyed by the forces, the first hill is always the highest
How are potential and kinetic energy mathematically related?
Kinetic and Potential EnergyHistoryA roller coaster train going down hill represents merely a complex case as a body is descending an inclined plane. Newton's first two laws relate force and acceleration, which are key concepts in roller coaster physics. At amusement parks, Newton's laws can be applied to every ride. These rides range from 'The Swings' to The 'Hammer'. Newton was also one of the developers of calculus which is essential to analyzing falling bodies constrained on more complex paths than inclined planes. A roller coaster rider is in an gravitational field except with the Principle of Equivalence.Potential EnergyPotential energy is the same as stored energy. The "stored" energy is held within the gravitational field. When you lift a heavy object you exert energy which later will become kinetic energy when the object is dropped. A lift motor from a roller coaster exerts potential energy when lifting the train to the top of the hill. The higher the train is lifted by the motor the more potential energy is produced; thus, forming a greater amount if kinetic energy when the train is dropped. At the top of the hills the train has a huge amount of potential energy, but it has very little kinetic energy.Kinetic EnergyThe word "kinetic" is derived from the Greek word meaning to move, and the word "energy" is the ability to move. Thus, "kinetic energy" is the energy of motion --it's ability to do work. The faster the body moves the more kinetic energy is produced. The greater the mass and speed of an object the more kinetic energy there will be. As the train accelerates down the hill the potential energy is converted into kinetic energy. There is very little potential energy at the bottom of the hill, but there is a great amount of kinetic energy.TheoryWhen the train is at the top and bottom of the hill there is not any potential or kinetic energy being used at all. The train at the bottom of the first drop should have enough energy to get back up the height of the lift hill. The "Act of Faith" in riding these amazing rides which seems more of a phenomena that is only a theory. In practices, the train never could make it back up the hill because of dissipative forces. Friction and air resistance, and even possible mid-course breaks, are dissipative forces causing the theory to be changed but not destroyed. These forces make it impossible for the train to have enough energy to make it back up the lift hill's height. In the absence of the dissipative forces the potential and kinetic energies(mechanical energy) will remain the same. Since the mechanical energy is destroyed by the forces, the first hill is always the highest
