answersLogoWhite

0

To calculate the time it takes to heat 450 liters of water with a 20-kilowatt element, you need to consider the heat capacity of water (4.18 J/g°C), the starting temperature of the water, and the desired ending temperature. With this information, you can calculate the total energy needed to heat the water and then divide it by the power of the element (20,000 watts) to find the time.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

How long to heat 500 liter water with 3kw element?

Specific Heat of Water = 4.1813 kJ/l/K If starting temperature is say 10°C - 500 Litres * 4.1813 (100°C - 10°C) = 188158.5 kJ 188158.5kJ / 3kW = 62719.5 Seconds = 17.42 Hours


How many watts are needed to heat 2.5 liters of water from 0c to 100c?

"Watt" is a rate of moving energy. Anynumber of watts can heat your liters,but the less watts you use, the longer the job will take.


How does a water pot boiler work to heat water efficiently?

A water pot boiler works by heating water in a closed container using a heat source such as a stove or electric element. The heat causes the water to boil and turn into steam, which then rises and transfers heat to the surrounding water. This process efficiently heats the water in the pot.


What heating element would you switch on to heat the whole tank?

You would switch on an immersion heater to heat the entire tank. It is designed to heat water in tank systems by immersing in the water and heating it directly.


Why is The heating element in a kettle is at the bottom explain why this is best place?

If the heating element was at the top and the kettle was not full, then you would not be able to heat water because the element would not be in the water. Thus the only place for the element is at the bottom. However, hot water is also less heavy than cold water, this means that heated water rises to the top and having the element at the bottom means that the water being heated is circulated and this is more efficient.

Related Questions

Watts to heat 2000 liters of water?

newtest3


Will 1 liter of hot water have more or less heat energy than 2 liters of hot water why?

2 liters of hot water will have more heat energy than 1 liter of hot water because there is a greater quantity of water to hold heat energy. The total heat energy in a system is directly proportional to the mass of the substance and its temperature.


What is the heat element in plaster?

There is no specific element in plaster that produces. The chemical reaction that results when plaster is mixed with water is what produces the heat.


How does a kettle filament heat all the water?

The filament or element gets hot and passes it's heat into the water.


How long to heat 500 liter water with 3kw element?

Specific Heat of Water = 4.1813 kJ/l/K If starting temperature is say 10°C - 500 Litres * 4.1813 (100°C - 10°C) = 188158.5 kJ 188158.5kJ / 3kW = 62719.5 Seconds = 17.42 Hours


Heat capacity of element?

Generally, you can find the heat capacity for an element by placing a small amount of the element in a beaker of boiling water. Then you allow the element to sit in the water until it becomes the same temperature of the water.


How do you calculate time taken to heat up a 300 liters water tank using electrical heater?

The amount of time that it takes to heat up a 300 liter water tank is dependent on the size of the water tank. However, to get an estimate multiply the liters by the size ofÊthe water tank.


How many watts are needed to heat 2.5 liters of water from 0c to 100c?

"Watt" is a rate of moving energy. Anynumber of watts can heat your liters,but the less watts you use, the longer the job will take.


How does an electric shower work to heat water for bathing?

An electric shower works by passing water through a heating element inside the shower unit. The heating element uses electricity to heat the water as it flows through, providing hot water for bathing.


How does an electric kettle heat up water?

An electric kettle heats up water by using an electric heating element located at the bottom of the kettle. When the kettle is plugged in and turned on, the electric current passes through the heating element, generating heat. This heat transfers to the water, causing it to heat up and eventually boil.


How does an electric kettle work to heat water efficiently and quickly?

An electric kettle works by using a heating element to quickly heat water. When the kettle is turned on, electricity flows through the heating element, which generates heat. The heat is transferred to the water, causing it to heat up rapidly. The design of the kettle allows for efficient heat transfer, resulting in fast boiling times.


Does the amount of water affect when the water boils?

yes. the more water the longer it would take for the heating element to heat the water. the less water, the less time it would take to heat.