0
What else can I help you with?
What is the size of breaker use in 2-4500w heating element?
For two 4500W heating elements, you would typically require a double pole 20 amp breaker for each element. This would provide adequate protection for the heating elements and ensure proper functioning of the circuit.
How to make a battery heated hot plate?
resistance wires between two plates one steel on silicone and one (the top) aluminium, connect to battery and done, or you can buy high tech carbon ones from Enerventure Pty Ltd 60 watt and 100 watt not cheap but are 12 volt direct, they are heating plates from their equipment.
What are the four features required to construct a working simple circuit?
To construct a working simple circuit, you will need a power source (such as a battery), a load (such as a light bulb or a motor), conductive pathways (wires) for the electricity to flow, and a switch to control the flow of electricity.
What would cause the average atomic mass to be close to a whole number?
The average atomic mass of an element is close to a whole number when the element has nearly equal amounts of its isotopes, with atomic masses that are close to whole numbers themselves. This occurs in elements with only one stable isotope or with stable isotopes that have similar abundances.
What element is in the heating element for toasters?
The heating element in toasters typically consists of a resistance wire made from a material like nichrome. This metal alloy is chosen for its ability to efficiently convert electrical energy into heat, allowing the toaster to quickly and evenly toast bread.
Why Side mirror not heating in VW passat?
Is it just one mirror? I would look at a possible broken wire or heating element on the mirror. If it is both, I would look at a possible bad switch since it affects both mirrors.
What is the size of breaker use in 2-4500w heating element?
For two 4500W heating elements, you would typically require a double pole 20 amp breaker for each element. This would provide adequate protection for the heating elements and ensure proper functioning of the circuit.
Why the heating element of an electric kettle is not placed in the middle of the kettle?
Placing the heating element at the bottom of the kettle allows heat to be directly transferred to the water, resulting in quicker and more uniform heating. If the heating element were in the middle, the water at the top of the kettle would take longer to heat up and there could be hot spots in the water.
What would cause a 1996 Mitsubishi Galant to have no heat?
heating element stopped working
Why does a hairdryer on the 240 volt setting work in the US and does this mean the switch to change the voltage is faulty and it's not really operating on 240 volts?
Hair dryers usually have a HIGH and a LOW setting. The HIGH heating element is about 8 ohms. The LOW heating element is about 32 ohms. voltage (squared) / resistance = power (watts) 120*120 / 8 = 1800 watts ( HIGH ) 120*120 / 32 = 450 watts ( LOW ) When the voltage switch is set to 240 volts, ALL it does is limit the HIGH/LOW switch to the LOW setting. 240*240 / 32 = 1800 watts ( LOW ) 240*240 / 8 = 7200 watts ( HIGH ) (the heating element would burn out)
How to make a battery heated hot plate?
resistance wires between two plates one steel on silicone and one (the top) aluminium, connect to battery and done, or you can buy high tech carbon ones from Enerventure Pty Ltd 60 watt and 100 watt not cheap but are 12 volt direct, they are heating plates from their equipment.
What will happen if the heating element is near at the top of the kettle?
In that case, it would be less efficient. Hot water rises to the top, mixing the water (if the heating element is at the bottom). When it is at the top, the water won't mix as well, and more heat would be wasted.
How would you megger a heating element?
To megger a heating element, first ensure the element is disconnected from any power source to avoid electrical shock. Use a megohmmeter to measure insulation resistance by connecting one lead to the heating element terminal and the other lead to the element's metal casing or ground. Activate the megger to apply a test voltage (commonly 500V) and read the insulation resistance value; a good heating element typically shows a resistance of 1 MΩ or higher. If the reading is significantly lower, it indicates potential insulation failure.
Is whole grain wheat a element?
No, why would it be anyways. it is part of the food group.
Why would your heating system only come on sometimes in a 1999 Olds Intrigue?
Possibly related to an ignition switch problem.
What are the four features required to construct a working simple circuit?
To construct a working simple circuit, you will need a power source (such as a battery), a load (such as a light bulb or a motor), conductive pathways (wires) for the electricity to flow, and a switch to control the flow of electricity.
Why tungsten is not as heating element in iron box?
Tungsten is not commonly used as a heating element in iron boxes because it has a very high melting point, which would make it difficult to work with and shape into the required size and configuration for the heating element. Additionally, tungsten is quite expensive compared to other materials commonly used for heating elements, making it less economical for this application.
