It is not recommended to boil a water pipe as it can damage the material and potentially release harmful chemicals. Instead, clean the water pipe regularly with isopropyl alcohol and salt to remove residue and buildup.
This pipe will hold 1,468.8 gallons of water.
It depends on how much each pipe can hold. And how long each pipe is.
The pipe would need to be 10 feet 10.8 inches long.
To clear a clogged gas pipe with water, you should turn off the gas supply, drain the pipe, and use compressed air to blow out the water. If the water is not easily removed, a professional plumber should be contacted to ensure the safe and proper removal of the water from the gas pipe before restoring gas flow.
garden hose
There is no obvious reason why there should be any water in the pipe. Furthermore, there are no units associated with the width of the pipe, so its volume cannot be calculated.
when your engine is hot it causes the water to boil and the water and the anti freeze will come out of the overflow pipe.
With in 3-4 years, if you drive long periods of time you will get more time out of it because you will dry up the water in the pipe and it will not rust out as fast.
Yes, as long as the water coming out of the pipe has a greater pressure than the water that is covering the pipe. If it is the other way around, the water covering the pipe will actually flow into the pipe. Think about it. It just makes sense.
That depends on how long the pipe is.
There need not be any water in the pipe! The volume of the pipe is 1044 Imperial gallons
That all depends on how long said 3" pipe is?
This pipe will hold 1,468.8 gallons of water.
Until it's hot. It doesn't take very long generally. Clean pipe, no moisture in it, no breeze and a flame 3/4 to and inch long, 10 to 20 seconds should be enough. If there is moisture in the pipe, it will dissipate the heat and if it has water in it, you can't get it hot enough with propane.
If the water pipe outside your house breaks, you should immediately turn off the main water supply to prevent further damage. Then, contact a professional plumber to repair the pipe as soon as possible. Avoid using water in your house until the pipe is fixed to prevent flooding and water damage.
The size of the water pipe from the meter to the house should be determined based on the water flow rate needed for the house. It is recommended to consult with a professional plumber to determine the appropriate size of the water pipe for optimal water flow and pressure.
If you have a busted water pipe in your home, you should immediately turn off the main water supply to prevent further damage, then call a plumber to repair the pipe. Clean up any water to prevent mold and mildew growth.