0
Until it's hot. It doesn't take very long generally. Clean pipe, no moisture in it, no breeze and a flame 3/4 to and inch long, 10 to 20 seconds should be enough. If there is moisture in the pipe, it will dissipate the heat and if it has water in it, you can't get it hot enough with propane.
What else can I help you with?
How can I fix a copper pipe?
To fix a copper pipe, you can use a pipe cutter to remove the damaged section, clean the ends of the pipe, and then solder a new piece of copper pipe in place using a propane torch and solder. Be sure to follow proper safety precautions and techniques when working with a torch.
What is a sweat inlet?
It is probably referring to the type of fitting. A fitting that is soldered to a copper pipe. It is called sweating when you use solder and a torch to connect copper pipe together or attach fittings to copper pipe.
How do you remove barb fitting on cooper pipe?
Either cut it out on the pipe with copper cutters or sweat it out with a plumbing torch.
Can wet copper pipe be soldiered?
Wet on the surface is no problem, it will evaporate with the torch. If there is water in the pipe, it will not solder because the water keeps the copper from getting hot enough. As long as the water is below the point of solder, it will work. Open the nearest valve or have some way for the steam to get out of the pipe.
How can I repair a copper pipe?
To repair a copper pipe, you can use a pipe cutter to remove the damaged section, clean the ends of the pipe, and then solder a new piece of copper pipe in place using a propane torch and solder. Make sure to follow proper safety precautions and techniques when soldering to ensure a secure and leak-free repair.
How can I effectively repair a copper pipe?
To effectively repair a copper pipe, you can use a pipe cutter to remove the damaged section, clean the ends of the pipe, and then use a soldering torch to join a new piece of copper pipe using solder and flux. Make sure to follow safety precautions and practice proper soldering techniques for a successful repair.
How much air pressure can copper pipe hold?
2000 Psi
How to sweat copper pipe effectively?
To sweat copper pipe effectively, clean the pipe and fittings, apply flux to the cleaned surfaces, heat the joint evenly with a torch, and then apply solder to the joint. The solder will melt and flow into the joint, creating a strong bond when it cools.
How can I repair a copper water line?
To repair a copper water line, you can start by turning off the water supply, cutting out the damaged section of the pipe using a pipe cutter, cleaning the ends of the pipe, and then soldering a new piece of copper pipe in place using a propane torch and solder. Finally, turn the water supply back on and check for any leaks.
How can I cap a copper pipe effectively?
To cap a copper pipe effectively, you can use a soldering technique. First, clean the end of the pipe and the inside of the cap. Apply flux to both surfaces, then heat the joint with a torch and melt solder around the connection. This will create a watertight seal.
How can I fix a copper water line?
To fix a copper water line, you can use a pipe cutter to remove the damaged section of the pipe. Then, clean the ends of the pipe and the inside of a copper coupling. Apply flux to the cleaned surfaces, insert the coupling, and solder the joint using a propane torch. Finally, allow the joint to cool and check for leaks.
How to cap a copper pipe effectively?
To cap a copper pipe effectively, you can use a solder-on cap or a push-on cap. First, clean the end of the pipe and the inside of the cap. Apply flux to both surfaces, then heat the pipe and cap with a torch. Once the copper is hot enough, apply solder to create a watertight seal. Alternatively, for a push-on cap, simply slide the cap onto the pipe and secure it in place.
