5.231 seconds.
Use equivalent fractions to figure this one out. ??? / 100 = 14.6/200 (part over whole) Now cross multiply. 14.6 * 100 = 200 * ??? 1460 = 200 * ??? (divide both sides by 200) 1460/200 = ??? ??? = 7.3 7.3% to check, multiply 7.3% * 200. Change 7.3% to .073 (move decimal 2 places to the left) .073 * 200 = 14.6 (check)
A running tap typically uses around 6-7 liters of water per minute. So, it would take roughly 1 to 1.5 minutes for a running tap to use 7-10 liters of water.
To convert watts to amps, you can use the formula: Amps = Watts / Volts. In this case, to convert 200 watts at 12 volts to amps, it would be: 200 watts / 12 volts = 16.67 amps. So, 200 watts at 12 volts is approximately 16.67 amps.
Light travels at a speed of approximately 299,792 kilometers per second in a vacuum. To calculate the time it takes for light to travel 1,000 kilometers, you can use the formula: time = distance/speed. Thus, it would take light about 0.00334 seconds (or 3.34 milliseconds) to cover that distance.
To run two 200 amp services, you would typically need to use 3/0 AWG copper wire for the service entrance conductors. This wire size is generally suitable for a 200 amp service. However, it is always recommended to consult with a qualified electrician to ensure proper sizing and installation according to local electrical codes.
about 200 hundered years for exsesive use i would say
Too long and to expensive so whats the use...
There is no law requirng their use. After you get pregnant, I would assume you would stop.
It depends on how big of a machine you buy and how often you use it. If you have someone cleaning your house once a week for say $50 or buy a $200 machine to clean your house yourself, it would pay for itself in four weeks.
Years.
No, you would use more.
A worksheet usually doesn't take as long to complete. If you can use the textbook to help with the answers, it can be even easier. I think everyone would prefer to use this method overall.
You use approximately 200 muscles to walk.
It probably depends on the speed of the vehicle that you are making use of.
How long does it take for "what" to get used to its habitat?
To find out how long it takes to skate 200 feet at a constant speed of 8 feet per second, you can use the formula: time = distance / speed. Plugging in the values, time = 200 feet / 8 feet per second, which equals 25 seconds. Therefore, it takes 25 seconds to skate 200 feet at that speed.
Hi, It would depend as long as you will have funds in your MyCAA grant.