0
What else can I help you with?
How does a runner generate continuous ATP when running in a long race?
by drinking lots of water
How long will it take to discharge 300m3 of water at 2 liters per seconds flow rate?
To calculate the time it takes to discharge 300 m3 of water, first convert the volume to liters: 1 m3 = 1000 liters, so 300 m3 = 300,000 liters. Then, divide the total volume by the flow rate to get the time. In this case, 300,000 liters / 2 liters per second = 150,000 seconds, or approximately 41.7 hours.
How long does it take to heat 450 liters water with 20killowatt element?
To calculate the time it takes to heat 450 liters of water with a 20-kilowatt element, you need to consider the heat capacity of water (4.18 J/g°C), the starting temperature of the water, and the desired ending temperature. With this information, you can calculate the total energy needed to heat the water and then divide it by the power of the element (20,000 watts) to find the time.
Which land form is carved from running water?
A canyon is a land form that is carved by running water over a long period of time, usually through erosion. The force of the water wears away the rock or soil, resulting in the formation of a deep, narrow valley with steep sides.
How long does it take for 4287200000000L of water to evaporate?
The time it takes for water to evaporate depends on factors like temperature, surface area, and airflow. In a typical scenario, it would take a very long time for 4287200000000L (or 4.2872 trillion liters) of water to evaporate completely, possibly months or even years.
How long has yahoo been running?
For seven years, dick.
How many kilometers in 13.1 liters?
It is not possible to answer this question, because kilometers is a measure of length, while liters is a measure of volume. It is like asking how long is the water in a glass.
How long can the body go with very little water?
Basicly the human body is made up of 5 liters of water and uses up 2 liters each day. So if u dont drink water for 3 days it is probable that you will die.
How long a sprinkler should be left running?
it should be running at least 3 hours no more because you wasting water and your water bill will be really high..
How many liters in 1 ton?
Short answer = 1,000 liters Long answer. The density of water varies somewhat depending on the temperature and the inclusion of any impurities. But for say, tap water, 1000 liters is 1 tonne. Yes, that is tonne with an 'e' - a metric tonne. 1 liter of water is 1kg, 1,000 liters is 1000kg (1 metric tonne) = 2205 pounds = 1.1ton (short, imperial ton).
How many liters to 50 percent water and 50 percent of hydrogen peroxide?
If you have a solution that is 50% water and 50% hydrogen peroxide, you would have equal volumes of each component. So if you have 1 liter of this solution, you would have 0.5 liters of water and 0.5 liters of hydrogen peroxide.
How many liters of water can be contained in a tank measuring 10cm long by 10cm wide by 10cm high?
1litre
How many liters of water in a tank 750MM wide by 2700MM long?
2.025 litres for every MM deep.
What is the Volume in liters of a 100mm long by 50mm diameter cylinder?
The volume in liters of a 100mm long by 50mm diameter cylinder is: 0.196 liters.
How much water would be required to fill a pool 8 meters long x 5 meters wide and 1m in depth?
40000 liters calculation: 8m x 5m x 1m = 40 meters cubed 1 meter cubed = 1000 liters of water so 40 cubic meters = 40000 liters of water
How much water do you use when you have the tap running?
it depends how long you leave the tap on
How many liters of water in 38 foot long x 12 foot wide above ground para pool please?
there are 28.317 liters per cubic ft 38 X 12 = 456 For every 1 ft of depth (which you didn't supply) there are 12912.552 liters of water, or 28.317 X 456
