To determine how many 12-inch by 12-inch pavers are needed for a walkway area of 30 square feet, first convert the dimensions of the paver to square feet. Each paver is 1 square foot (12 inches x 12 inches = 144 square inches, which equals 1 square foot). Therefore, to cover 30 square feet, you would need 30 pavers, since each paver covers 1 square foot.
You would need 320 pavers to cover 160 square feet with 6x9 pavers, assuming each paver covers 0.5 square feet.
It will take four pavers to cover one square foot. You will need 720 pavers.
You would need approximately 104 pavers to cover 250 square feet with 16 x 16 pavers, assuming no cuts or wastage. This calculation accounts for the fact that each paver covers 1.78 square feet (16 x 16 = 256 square inches, which is equivalent to 1.78 square feet).
You would need 81 16x16 pavers to cover a 36 square foot area. Each 16x16 paver covers an area of 1.78 square feet, so dividing 36 by 1.78 gives you 20.22 pavers. Since you can't have a fraction of a paver, you would round up to the nearest whole number, which is 81.
In theory the answer is 800 tiles but this assumes that the area is "well behaved" and, if not, that you are prepared to use all the offcuts to fill bits in mosaic-style. A shape which in 17 inches wide, for example, will require a lot more pavers.
how many 12 in by 12 in pavers is required for30 square feet
6x3 would require 2 pavers by 4 pavers to make a square foot which is 8 pavers per square foot. 240 pavers. That's only a 5 foot by 6 foot square.
How many brick pavers in a square foot
The use of concrete pavers, often referred to as paving stones, is growing rapidly on both commercial and residential construction projects. Interlocking pavers form a patterned surface which can be put into service immediately. Pavers are manufactured in various textures and colors. A big benefit of pavers is that they can be removed and re-installed, which reduces future service interruptions.The use of concrete pavers is expanding rapidly. There is plenty of growth to go: in Europe there are 100 square feet of pavers installed per person annually whereas, in the United States it is only 1 square foot per person. Pavers can be installed on your driveway, on a walkway, and on a patio. Pavers come in a variety of patterns, colors and styles to suit most any design idea.
Area of 1 paver = 16*16 = 256 square units. Area of patio = 20*20 = 400 square units. Number of pavers required = Area of patio/Area of paver = 400/256 = 1.5625 So 2 pavers will suffice.
You would need 320 pavers to cover 160 square feet with 6x9 pavers, assuming each paver covers 0.5 square feet.
Assume they are 9 inch x 6 inch pavers. The area of each paver is 9*6/144 = 3/8 sq feet Area to be covered = 144 square feet So number of pavers required = 144/ (3/8) = 384 That is the minimum number required if the area to be covered is "well behaved". If the area is not an exact number of pavers long/wide, of if there are curves you will have to cut some pavers and, unless all the offcuts can be used, you will require more than 384.
144.63 pavers
31 Get 35 for breakage.
To determine how many pavers you need for a 350 square foot area, first, find out the size of the pavers you're using. For example, if each paver is 1 square foot, you would need 350 pavers. If the pavers are smaller, like 12x12 inches (1 square foot), you would still need 350 pavers. Always account for extra pavers to cover breakage or cuts, typically adding about 10% to your total.
Assuming the question is about pavers that are 12 inch x 12 inch, then each paver covers 1 sq foot and so 150 pavers would be required. However, this also assumes that there is no wastage at all and that there are no breakages.
It will take four pavers to cover one square foot. You will need 720 pavers.