The units are not freely convertible. You would need to specify a voltage.
Watts divided by volts equals amps so 6000 divided by 120 = 50
The equation that you are looking for is Amps = Watts/Volts. There are 6000 watts in 6kW.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
To determine how many amps are in 115 volts, you need to know the power (in watts) being used. The relationship between volts, amps, and watts is given by the formula: Watts = Volts × Amps. Therefore, to find the amps, you can rearrange the formula: Amps = Watts / Volts. For example, if you have a device that uses 1150 watts, you would have 10 amps at 115 volts (1150 watts ÷ 115 volts = 10 amps).
To find the amperage, you can use the formula: Watts = Volts x Amps. Rearranging it, we get Amps = Watts / Volts. Plugging in the values for 3000 Watts and 460 Volts, we get: Amps = 3000 / 460 = 6.52 amps.
Watts divided by volts equals amps so 6000 divided by 120 = 50
The equation that you are looking for is I = W/E. Amps = Watts/Volts.
The equation that you are looking for is Amps = Watts/Volts. There are 6000 watts in 6kW.
I'm assuming the electrical system is single phase, such as a home. If not, you need to hire someone to do the work for you. First, 6000 watts at 120v is 50 amps, so if your load is truly 6000 watts, 30 amps isn't enough. If your 6000 watts is 240v, which would draw 25 amps, then 30 amps is plenty. Ten gauge wire may not be placed an a breaker or fuse larger than 30 amps.
There are zero amps in 6600 watts. Watts are the product of amps times volts. W = A x V. To find amperage use the following equation, A = W/V, so as you can see a voltage value is needed in the equation to result in an amperage.
Yes, Power (in watts) equals voltage times current (Amps). Amps = Watts/Volts If your generator is 6000 watts that would operate a 120 volt load up to 50 amps (6000/120=50). If you are running a motor or compressor, the initial inrush of current is about 3 times higher so 14 X 3 = 42amps. Should do fine...
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
25 amps, 6000 watts
There are zero watts in 730 amps. Watts is the product of amps times volts. As you can see without a voltage no answer can be given.
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
How many Amps is the fridge pulling? Multiply the Amps by the 120V circuit you're plugging into and you'll get your Watts.
I t depends. Watts = Amps times volts. 40 amps x 120 volts =4800 watts or 40 Amps x 12 volts = 480 watts.