Minimum current would be 10000 divided by 240 but it might be up to 30% more if the load has a poor power factor.
41.666 amps. Divide watts by volts.
100 amps
3 AA batteries provide about 4.5 volts. The amps depend on the load but for D-cells a load of 10 amps can be sustained for short periods.
45-50 amps. But your overcurrent protection and wire must be designed for 125% of load so the max overcurrent protection is 55 amps or 60
A pool pump motor which is drawing half the amps listed on its nameplate can indicate a problem with the windings or a lack of incoming current. Pumps will only draw as many amps as are required to operate under the current load.
10000 divided by 220 for a resistive load.
Minimal 100. Depends on load draw of home. Can be 200 amps or 400 amps as well.
41.666 amps. Divide watts by volts.
Then you are trying to get more HP out of the motor that it can supply. Back off on the load that the motor is driving or put a bigger motor onto the load.
Watts = Volts x Amps x Power Factor. An incandescent light bulb is a resistive load so PF = 1. ANSWER: = 1/2 Amp
There are zero amps in 3000 volts. A load needs to be connected to the voltage.
100 amps
3 AA batteries provide about 4.5 volts. The amps depend on the load but for D-cells a load of 10 amps can be sustained for short periods.
23
Slightly more than 11 amps. <<>> I = W/E I = 2500000/220 = 11364 amps
45-50 amps. But your overcurrent protection and wire must be designed for 125% of load so the max overcurrent protection is 55 amps or 60
A pool pump motor which is drawing half the amps listed on its nameplate can indicate a problem with the windings or a lack of incoming current. Pumps will only draw as many amps as are required to operate under the current load.